3 June 2014 in IEEE Transactions on Control Systems Technology
This paper presents a novel nonlinear guidance scheme for ground track control of aerial vehicles. The proposed guidance logic is derived using the sliding mode control technique, and is particularly suited for unmanned aerial vehicle (UAV) applications. The main objective of the guidance algorithm is to control the lateral track error of the vehicle during flight, and to keep it as small as possible. This is achieved by banking the vehicle, that is, by executing roll maneuvers. The guidance scheme must perform well both for small and large lateral track errors, without saturating the roll angle of the vehicle, which serves as the control input for the guidance algorithm. The limitations of a linear sliding surface for lateral guidance are indicated; a nonlinear sliding surface is thereafter proposed which overcomes these limitations, and also meets the criterion of a good helmsman. Stability of the nonlinear surface is proved using Lyapunov theory; control boundedness is also proved to ensure that the controls are not saturated even for large track errors. The proposed guidance law is implemented on the flight control computer of a scaled YAK-54 UAV and flight results for different scenarios (consisting of both small and large errors) are presented and discussed. The flight test results confirm the effectiveness and robustness of the proposed guidance scheme.
31 October 2008 in IEEE Transactions on Industrial Electronics
Automotive-engine control and fault diagnostics largely depend upon the accuracy of the nonlinear models used. The structure of these nonlinear models is generally agreed upon. However, the model parameters are mostly difficult to obtain. This paper presents the development of second-order sliding-mode technique with real twisting algorithm for estimation of more than one parameter from a single dynamical equation of the nonlinear model. The system under study is a mean-value engine model of a naturally breathing gasoline engine. The parameters estimated are throttle body's discharge coefficient, load torque, and indicated torque as a function of inlet manifold pressure. The estimated variables are used to compensate for the unmodeled dynamics, modeling inaccuracies, and approximations which arise from the assumptions made for the development of mathematical model of a real-world system. The resulting model is a better description of the actual engine dynamics and gives good agreement to real engine data. The data are acquired from a production model vehicle equipped with an electronic control unit compliant to OBD-II standard. The observer designed is simple enough for implementation, and estimated parameters can also be used for engine-controller design and fault-diagnosis work.
29 March 2010 in IEEE Transactions on Industrial Electronics
This paper presents the design, simulation, and experimental results of a new scheme for the robust parameter estimation of uncertain nonlinear dynamic systems. The technique is established on the estimation of robust time derivatives using a variable-structure differentiator observer. A second-order sliding motion is established along designed sliding manifolds to estimate the time derivatives of flat outputs and inputs, leading to better tracking performance of estimates during transients. The parameter convergence and accuracy analysis is rigorously explored systematically for the proposed class of estimators. The proposed method is validated using two case studies; first, the parameters of an uncertain nonlinear system with known, but uncertain nominal parametric values are estimated to demonstrate the convergence, accuracy, and robustness of the scheme; in the second application, the experimental parameter estimation of an onboard-diagnosis-II-compliant automotive vehicle engine is presented. The estimated parameters of the automotive engine are used to tune the theoretical mean value engine model having inaccuracies due to modeling errors and approximation assumptions. The resulting dynamics of the tuned engine model matches exactly with experimental engine data, verifying the accuracy of the estimates.
1 August 2022 in IEEE Access
The goal of radar emitter recognition (RER) is to extract the features of the received emitter signal. This has become a critical issue as new radar types are emerging, and the electromagnetic environment is becoming denser and more complex. Deep neural networks (DNNs) have recently proven effective for emitter identification; however, the recognition of phase-coded waveforms at a low signal to noise ratio (SNR) remains challenging. In this paper, a novel phase-based RER approach using short time fourier transform (STFT) and bidirectional long short term memory (BiLSTM) is proposed, while enhancing the ability to learn features from noisy signals. The phase spectrum of phase-coded signals was analyzed in contrast to the amplitude spectrum used in state-of-the-art approaches in the literature. The derived phase-based features were directly provided as inputs to the proposed BiLSTM architecture. The fully connected layer follows the BiLSTM layer. Finally, a softmax classifier was employed to accomplish the recognition task. Six distinct types of phase-coded waveforms degraded by additive white gaussian noise (AWGN) with SNRs ranging from −8 dB to 8 dB were simulated. The method proposed in this research involves simple pre-processing and exhibits an overall recognition accuracy of more than 90% at SNR of −2 dB.
1 January 2017 in ISA Transactions
1 January 2019 in Measurement
SASyed Muhammad Dildar Ali