23 March 2017 in ACS Nano
16 August 2018 in ACS Nano
Nanoprint-based color display using either extrinsic structural colors or intrinsic emission colors is a rapidly emerging research field for high-density information storage. Nevertheless, advanced applications, e.g., dynamic full-color display and secure information encryption, call for demanding requirements on in situ color change, nonvacuum operation, prompt response, and favorable reusability. By transplanting the concept of electrical/chemical doping in the semiconductor industry, we demonstrate an in situ reversible color nanoprinting paradigm via photon doping, triggered by the interplay of structural colors and photon emission of lead halide perovskite gratings. It solves the aforementioned challenges at one go. By controlling the pumping light, the synergy between interlaced mechanisms enables color tuning over a large range with a transition time on the nanosecond scale in a nonvacuum environment. Our design presents a promising realization of in situ dynamic color nanoprinting and will empower the advances in structural color and classified nanoprinting.
6 July 2017 in Advanced Materials
13 December 2017 in Laser & Photonics Reviews
Lead halide perovskites have recently attracted attention due to their outstanding photoelectric properties. Hence, perovskite‐based optoelectronic devices are widely studied. Herein, a simple solution‐based one‐step anti‐solvent method to produce well‐controlled and uniform CH3NH3PbBr3‐based micro‐devices is reported. It is confirmed that the size and mode numbers of the self‐assembled microdisk cavities can be well controlled by modifying the size of the SiO2 microdisks on the substrate or changing the concentration of the perovskite precursor. With this simple and robust method, the produced CH3NH3PbBr3 microdisk arrays are extremely uniform in both their size distribution and emission spectra. Moreover, a perovskite photodetector array with fast rise (<8.3 ms) and decay (<8.3 ms) times was fabricated by periodically patterning the substrate. Based on the high controllability and high reproducibility of the patterned CH3NH3PbBr3 microdisk arrays, this cost‐effective and mass‐manufacturable approach significantly increases the production yield of lead halide perovskite microdevices and boosts their ability to be used in practical applications.
20 September 2017 in Optica
Whispering gallery mode based optical microcavities are important for highly sensitive optical sensing. However, the current experimental realizations are strongly dependent on high-resolution tunable lasers and evanescent coupling, which are too cumbersome and too expensive for portable devices. Herein we experimentally demonstrate a cost-effective and robust approach to detect and size a single nanoparticle with far-field laser emissions. By placing a limacon microdisk close to a spiral microdisk, chiral resonances have been successfully generated. In contrast to previous research, here the internal chirality is strongly correlated with the far-field patterns (FFPs) and thus can be transduced to far-field emissions. Once a nanoparticle is attached to the limacon microdisk, the asymmetrical backscattering at the notch of the spiral can be averaged by the symmetrical scattering of the nanoparticle. Consequently, the internal chirality and the corresponding FFPs are changed. By measuring a far-field directional laser emission, nanoparticles with a radius of have been successfully detected and sized without employing any spectral information. As a narrow-linewidth tunable laser is not used in our experiment and microdisks lasers may be electrically driven, this research will provide a new path to cost-effective, portable, highly sensitive optical sensors.
9 June 2017 in ACS Applied Materials & Interfaces