31 January 2023 in IEEE Transactions on Geoscience and Remote Sensing
For coherent microwave radar, the Bragg scattering from the broken-short waves generated after wave breaking usually introduces extra low-frequency components in the estimated wave height spectrum, and thus leads to inaccurate retrievals of wave parameters, especially the overestimation of wave period. In order to eliminate the impacts of wave breaking, some methods based on the removal of “group-line” in the spatial-temporal domain are proposed to estimate wave parameters. However, these methods are not suitable for the case that the spatial-temporal data are not available. To address this problem, a method is proposed to invert wave parameters only from the time-Doppler spectrum. Temporal velocity series are derived from the time-Doppler spectrum in which breaking components are removed. Then the wave height spectrum from which wave parameters can be obtained is estimated from the velocity series by the direct transform relationship based on the linear wave theory. Without spatial-temporal data, the “group-line” can be removed using the proposed method, and the method is validated by simulation. In addition, an approximately eleven-day dataset collected with a shore-based coherent S-band radar deployed along the coast of Zhejiang province in China is reanalyzed and used to retrieve significant wave height and mean wave period. Compared with the buoy-measured data, the significant wave heights and mean wave periods retrieved by the proposed method have root-mean-square differences (RMSDs) of 0.25 m and 0.60 s, respectively, and also have correlation coefficients (CCs) of 0.94 and 0.81, respectively. The results indicate that the proposed method can invert wave parameters from the time-Doppler spectrum with a reasonable performance.
20 July 2023 in IEEE Transactions on Geoscience and Remote Sensing
Shipboard coherent microwave radar is a rapidly emerging tool for detecting the physical characteristics of ocean waves. However, the scattering mechanism for coherent microwave radar on ship has never been established for developers to put this type of radar into extensive use. To address the problem, a model incorporated with free and broken waves for shipboard coherent microwave radar is then proposed. Six-degree-of-freedom motion and forward velocity of the ship, which can reflect the real-life motion of the ship, are derived into three-coordinate ship velocity components. Then the three-coordinate ship velocity components combined with the azimuthal angle between the radar look direction and the forward direction of the ship (ABRF) are converted into the radial velocity integrated into the shipboard coherent microwave radar model. The characteristics in the Doppler spectrum of the shipboard coherent microwave radar are analyzed and explained. By comparing the simulation with the shipboard radar-measured data, the correctness of the model is verified. The variation of radar echoes with the azimuthal angle between the radar look direction and the dominant wave, the forward motion of the ship, the azimuthal angle between the radar look direction and the forward direction of the ship, and sea states are revealed. This model could provide a theoretical basis for improving the performance of ocean wave measurements on shipboard coherent microwave radar and advancing the microwave ocean remote sensing technique.
14 June 2023 in IEEE Transactions on Geoscience and Remote Sensing
Shipboard coherent microwave radar has been a rapidly developing tool for ocean wave measurements. However, the radial velocity estimated from echoes collected with a shipboard radar is significantly affected by the forward speed and six-degrees-of-freedom (six-DOF) motion of the ship. Accordingly, the performance of ocean wave parameter inversion using such radar degrades. To address this problem, the distribution of energy modulated by the ship motion in the wavenumber-frequency spectrum is illustrated, and wave parameters inversion method based on shipboard coherent S-band radar is proposed. An adaptive filter is designed according to the distribution of the energy components modulated by the ship motion in the wavenumber-frequency spectrum. The proposed method filters out the non-wave components and preserves the wave field components. A two-dimensional inverse Fourier transform is applied to the filtered wavenumber-frequency spectrum to obtain the spatial-temporal radial velocities. Then the wave height spectrum is estimated from the radial velocities based on the direct relationship between the radial velocity spectrum and the wave height spectrum. Later, the significant wave height and mean wave period can be derived from the wave height spectrum. A dataset collected with a shipboard coherent S-band radar in the South China Sea in December 2020 is analyzed. The ship deployed with the radar sailed around a wave buoy according to a route plan for two days in that experiment. Comparisons between the radar-estimated and buoy-measured measurements in cases of ship motion are conducted. The results indicate that the proposed method can invert wave parameters well.
29 April 2025 in IEEE Geoscience and Remote Sensing Letters
In this letter, we propose a novel methodology for retrieving wave parameters, i.e., significant wave height and mean wave period, in near-nadir looking mode using a 77 GHz frequency-modulated continuous-wave (FMCW) multipleinput– multiple-output (MIMO) radar. First, the range-Doppler spectrum is estimated from the raw radar data, and the time-Doppler spectrum in the desired direction is obtained by integrating the digital beamforming algorithm with MIMO array techniques. Next, the radial velocity series are calculated using the spectral moment method. A Fourier transform is then applied to estimate the wave height spectrum from the radial velocity series, and the significant wave height and mean wave period can be obtained by the moment estimation method. Finally, the results obtained from numerical simulations and sea surface observations demonstrate that the retrieval method can extract wave parameters with reasonable performance at small incidence angles (0∼18°).
27 May 2024 in IEEE Transactions on Geoscience and Remote Sensing
Shipboard coherent microwave radar is an emerging tool for ocean observation, which utilizes the direct relationship between the orbital wave velocity and the wave height spectrum to retrieve wave parameters. However, the ship’s motion and broken waves would introduce extra Doppler components into the Doppler spectrum of the sea echo, and accordingly degrade the performance of wave measurements. Consequently, the Doppler components should be estimated before the inversion of ocean wave parameters. To address this problem, a Doppler frequency components estimation method, which describes the problem as an optimization problem with constraints to fit the raw Doppler spectrum, is proposed. Firstly, the Doppler spectrum model for shipboard coherent microwave radar is parameterized and simplified. Then, an objective function and the constraints are established based on the generation mechanism of frequency components in the Doppler spectrum to make the reconstructed Doppler spectrum fit the raw Doppler spectrum. Subsequently, the particle swarm optimization algorithm is used to find the optimal coefficient to solve the optimal solution. Lastly, frequency components, which are produced by ship motion, broken waves, and orbital modulation of gravity waves, are estimated. To validate the proposed method, the simulation data and the experimental data collected with a shipboard S-band radar in the South China Sea in December 2020 are analyzed. The estimated frequency components from radar data are compared with the MTi-G-measured and buoy-measured data. The results indicate that the proposed method is effective for estimating the frequency components and could improve the performance of wave measurements.
21 May 2026 in IEEE Transactions on Geoscience and Remote Sensing
Shipboard coherent microwave radar is a promising approach for wave measurement during vessel navigation. However, in complex multi-directional sea states, the radial velocities measured by the radar result from the superposition of waves propagating both toward and away from the antenna. This superposition causes overlapping wave spectra and degrades the accuracy of wave parameter inversion. To address this issue, a novel method based on Two-Dimensional Variational Mode Decomposition (2D-VMD) is proposed for separating and reconstructing the radial velocities corresponding to waves propagating toward and away from the radar. First, spatiotemporal radial velocities are extracted from raw radar sea echoes and decomposed into multiple quasi-orthogonal submodes via 2D-VMD. Based on the spectral distributions of these sub-modes, “non-wave velocities” are eliminated, while the toward and away wave velocity components are further separated and reconstructed. Finally, non-overlapping directional wave spectra are derived from the reconstructed radial velocities, from which wave parameters are estimated. The proposed method is validated using two shipboard experiments conducted in the South China Sea: one in 2020 under directional bimodal sea states and another in 2019 under unimodal sea states. The wave spectra and parameters estimated by the radar show excellent consistency with buoy measurements in both scenarios, thus validating the effectiveness and robustness of the proposed method in separating velocity superposition and inverting directional wave spectra precisely.