1 April 2016 in Journal of Applied Research and Technology
One of the major sources of petroleum products is obtained from the sea (offshore and onshore). Here the major problem faced by the worker is, maintaining the constant pressure and flow till the extreme ends. In this paper, the parameters such as pressure and flow are maintained constantly by implementing control valves depending on the different pressure and flow rate of the transmitting pipe. PLC (Programmable Logical Controller) is used to automatically regulate the flow and pressure during petroleum product transportation by controlling the percentage of opening of the control valves and pumps respectively. The required set point for pressure and flow rate are obtained by implementing a suitable controller that regulates in a long transmitting concrete pipes. For this, a PLC based PID controller is developed and its open loop responses are identified. The simulation studies are carried out in the MATLAB/SIMULINK platform to ensure the performance of the controller. The controller tuning is done by ZN (Ziegler and Nicholas) PID and Simple-IMC (Internal Model Control) PID, Shams tuning IMC-PID controller. The simulation result provides better control action when Shams IMC-PID controller is used. Shams IMC-PID controller is experimentally verified on the lab scale-setup and the results prove that it provides most consistent performance as compared to ZN and Simple-IMC PID controllers
1 January 2014 in IFAC Proceedings Volumes
20 November 2017 in International Journal of Green Energy
In the recent decades, the energy demand for transport and industrial sector has increased considerably. Fossil fuels which were the major fuel source for decades are no more sustainable. Biodiesel is an efficient alternative compared to depleting fossil fuels. The prospect of biodiesel as the best alternative fuel is a reliable source compared to depleting fossil fuels. Hydrogen is also considered as an attractive alternative fuel producing low emission with improved engine performance. This paper investigates the performance and emission characteristics of a single cylinder compression ignition engine using hydrogen as an inducted fuel and biodiesel, aka Pongamia pinnata as injected fuel. The experiments are conducted for different quantities of hydrogen induction through the intake manifold in order to improve the performance of the engine. The performance parameters such as brake thermal efficiency, brake specific fuel consumption, exhaust temperature and emission quantities like HC, NOX, CO, CO2 of biodiesel fueled CI engine with variable mass flow rate of hydrogen are investigated. The performances of biodiesel combined with hydrogen at varying mass flow rates are also compared. The 10 LPM hydrogen induction with biodiesel provided 0.33% increase of brake thermal efficiency compared with diesel and increase of 3.24% to biodiesel at 80% loading conditions. The emission of HC decreased by 13 ppm, CO decreased by 0.02% by volume and CO2 decreased by 3.8% by volume for biodiesel with induction of hydrogen at 10 LPM to that of neat biodiesel for 80% load conditions.
1 January 2012 in Procedia Engineering
This paper presents modeling and control of highly non linear system using gain scheduled PI controller. Interacting spherical two tank system (ISTTS) is considered as non linear system, where the aim is to control the liquid level of tank. Control of liquid level in interacting spherical two tank system is highly challenging due to variation in the area of cross section of ISTTS with change in shape. Transfer function for ISTTS is derived and with the relationship between ISTTS parameters and PI parameters, gain scheduled PI controller is implemented. Performance is highlighted by calculating performance indice
7 June 2017 in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
Environmental impacts are increased on human/animal health day by day. This research work focussed on the implementation of advanced control theory for the reduction of SO2 coming out from thermal power plants. Flue gas desulphurization technique in which packed column is used for gas–liquid mass transfer by externally adding H2O2 with H2SO4 as the scrubbing liquid. The concept of fractional calculus has tremendous potential to improve the controller performance. Hence, the fractional calculus is incorporated with coefficient diagram method to tune the proportional–integral–derivative controller, and it is named as fractional-order-based coefficient diagram method (FOCDM-PIλDµ) controller. Flow rate of externally added H2O2 is regulated by fractional-order-based coefficient diagram method PIλDµ controller tuned by particle swarm optimization algorithm. The performance of fractional-order-based coefficient diagram method controller is analysed and compared with the classical controllers such as Ziegler–Nichols proportional–integral–derivative and coefficient diagram method–based proportional–integral–derivative controller in a lab-scale SO2 emission control experimental setup.
9 May 2022 in IETE Journal of Research
Electro-hydraulic servo systems (EHSSs) are nonlinear and uncertain due to their inappropriate fluid levels, air temperature, friction, and leakage. The finite-time tracking control is difficult with the use of a proportional, integral, and derivative (PID) controller, which no longer provides adequate and achievable control performance over the whole operating range. This has led to the idea of an iterative learning controller (ILC). An intelligent and memory-based learning control approach that attempts to imitate the human way of thinking. The proposed ILC has an additional learning gain, learning filter, and robustness filter to enhance the finite-time tracking performance and stability improvement. This study is focused on the design of the ILC to regulate the servo spool valve of an EHSS, which in turn controls the displacement of a hydraulic cylinder. In simulation and experimentation, vital parameters such as overshoot and settling time in the varieties of tests, the ILC has shown better results when compared to conventional PID controllers. In step input tracking at different operating points over 0-250 mm, the ILC has 40% less overshoot and settles 12-15 s faster than the PID controller. In sinewave tracking and disturbance rejection, the PID controller performs better than the ILC in integral square error and integral absolute error as the error indices are not considered as the objective function in the design of the controller. During a robustness test, the ILC rejects the uncertainty, which evidences the effectiveness of the proposed controller.