Nickel oxide is a promising material for transparent electronics applications. This semiconductor demonstrates the possibility of modifying its physical properties depending on the method of growth and subsequent processing. Here the effects of the discharge power are reported during reactive dc magnetron sputtering, as well as the modes of subsequent annealing of NiO films, on their structural, electrical, and optical properties. NiO films are annealed at various temperatures both in an oxygen‐containing environment and under vacuum conditions. Deposited NiO films have a polycrystalline structure with a preferred orientation (200) for the low discharge power mode and (111) for the high discharge power mode. However, obtained NiO films exhibit crystallinity improvement after annealing. The presence of both Ni2+ and Ni3+ oxidation states in the deposited films is found. In addition, it is shown that the relative carrier concentration (Ni3+/Ni2+ peak area ratio) can be controlled by choosing the NiO film preparation mode. The trend in this ratio corresponds to the trend in film conductivity and the number of free‐charge carriers. The deposited films are semitransparent, and the estimated optical bandgap of NiO is in the range from 3.50 to 3.74 eV.
The rhombohedral phase of gallium oxide (α-Ga2O3) is of interest because of its highest bandgap among the rest of the Ga2O3 polymorphs, making it particularly attractive in applications. However, even though the ion beam processing is routinely used in device technology, the understanding of radiation phenomena in α-Ga2O3 is not mature. Here, we study non-linear effects for radiation disorder formation in α-Ga2O3 by varying both the defect generation rate and the density of collision cascades, enabled by comparing monoatomic and cluster ion implants, also applying systematic variations of ion fluxes. In particular, we show that the collision cascade density governs the surface amorphization rates, also affected by the ion flux variations. These trends are explained in terms of the non-linear in-cascade and inter-cascade defect interactions occurring during ballistic and dynamic defect annealing stages. As such, these data reveal new physics of the radiation phenomena in α-Ga2O3 and may be applicable for more predictive ion beam processing of α-Ga2O3-based devices.
2 January 2024 in Radiation Effects and Defects in Solids
Control over radiation defect generation is essential while applying ion-beam technology to materials. In this work, we study disorder formation in rhombohedral polymorph of gallium oxide (α-Ga2O3) as a function of the bombarding ion mass. As such, we discriminate the impact of the collision cascades density, specifically its impact on the surface amorphization rates in α-Ga2O3. Importantly, along with collecting experimental data, we calculated collision cascades parameters using different algorithms based on the binary collision approximation predicting disorder accumulation trends observed in the experiments. Furthermore, we showed that collision cascades in α-Ga2O3 can be modeled within a fractal geometry framework, correlating fractal dimension with the collision cascade density. These results enhance the understanding of radiation defects in Ga2O3 polymorphs, applicable in the development of the ion beam technology in these interesting materials.
1. Nanocomposite materials are widely used in various fields of science and engineering, including catalysis, sensors and coatings. The embedding of nanoparticles into a bulk matrix or thin surface...