31 May 2021 in Advanced Materials
8 December 2023 in Advanced Materials
JFJavier M. Morales Ferrer
27 October 2023 in Advanced Functional Materials
26 April 2025 in Advanced Science
JFJavier M. Morales Ferrer
+3
Gallium‐based liquid metal alloys (GaLMAs) have widespread applications ranging from soft electronics, energy devices, and catalysis. GaLMAs can be transformed into liquid metal emulsions (LMEs) to modify their rheology for facile patterning, processing, and material integration for GaLMA‐based device fabrication. One drawback of using LMEs is reduced electrical conductivity owing to the oxides that form on the surface of dispersed liquid metal droplets. LMEs thus need to be activated by coalescing liquid metal droplets into an electrically conductive network, which usually involves techniques that subject the LME to harsh conditions. This study presents a way to coalesce these droplets through a chemical reaction at mild temperatures ( T ∼ 80 °C). Chemical activation is enabled by adding halide compounds into the emulsion that chemically etch the oxide skin on the surface of dispersed droplets of eutectic gallium indium (eGaIn). LMEs synthesized with halide activators can achieve electrical conductivities close to bulk liquid metal (2.4 × 10 4 S cm −1 ) after being heated. 3D printable chemically coalescing LME ink formulations are optimized by systematically exploring halide activator type and concentration, along with mixing conditions, while maximizing for electrical conductivity, shape retention, and compatibility with direct ink writing (DIW). The utility of this ink is demonstrated in a hybrid 3D printing process to create a battery‐integrated light emitting diode array, followed by a nondestructive low temperature heat activation that produces a functional device.
20 May 2024 in Advanced Materials
JFJavier M. Morales Ferrer
24 November 2025 in Nature Communications
JFJavier M. Morales Ferrer
Creating shape-morphing structures with time-responsive materials is a key goal of 4D printing, but combining high stiffness ( E ) and toughness ( K ) in a single material remains difficult. Soft materials stretch but lack strength, while stiff materials resist deformation but are brittle. Nature overcomes this trade-off in skeletal muscle by surrounding strong fibers with soft, tough tissue for protection and support. Inspired by this strategy, we develop a multi-material printing method that combines stiff synthetic muscle with a soft, stretchable adhesive to form a composite structure. Here, we show that this design greatly improves toughness without sacrificing stiffness, enables controlled actuation, and maintains function after multiple fractures. We demonstrate these properties in a damage-tolerant actuator, a lifting robot with record performance, and a lattice that detects and withstands extreme loads while remaining operational.