3 October 2018 in IEEE Wireless Communications Letters
LoRa is one of the promising techniques for enabling low power wide area networks for future Internet-of-Things devices. Although LoRa allows flexible adaptations of coverage and data rates, it is subject to intrinsic types of interferences: co-SF interferences due to collisions among end-devices with the same spreading factor (SF), and inter-SF interferences due to collisions among devices with different SFs. Most current works have considered perfect orthogonality among different SFs. We thus provide a theoretical analysis of the achievable LoRa throughput in uplink, where all LoRa-specific capture conditions are included. Results show the accuracy of our analysis despite approximations, and the throughput losses from imperfect SF orthogonality, under different SF allocations. Our analysis will enable the design of specific SF allocation mechanisms, in view of further throughput enhancements.
17 February 2020 in IEEE Transactions on Communications
14 December 2018 in IEEE Transactions on Vehicular Technology
The characteristics of mobile Underwater Sensor Networks (UWSNs), such as low communication bandwidth, large propagation delay, and sparse deployment, pose challenging issues for successful localization of sensor nodes. In addition, sensor nodes in UWSNs are usually powered by batteries whose replacements introduce high cost and complexity. Thus, the critical problem in UWSNs is to enable each sensor node to find enough anchor nodes in order to localize itself, with minimum energy costs. In this paper, an Energy-Efficient Localization Algorithm (EELA) is proposed to analyze the decentralized interactions among sensor nodes and anchor nodes. A Single-Leader-Multi-Follower Stackelberg game is utilized to formulate the topology control problem of sensor nodes and anchor nodes by exploiting their available communication opportunities. In this game, the sensor node acts as a leader taking into account factors such as 'two-hop' anchor nodes and energy consumption, while anchor nodes act as multiple followers, considering their ability to localize sensor nodes and their energy consumption. We prove that both players select best responses and reach a socially optimal Stackelberg Nash Equilibrium. Simulation results demonstrate that the proposed EELA improves the performance of localization in UWSNs significantly, and in particular the energy cost of sensor nodes. Compared to the baseline schemes, the energy consumption per node is about 48% lower in EELA, while providing a desirable localization coverage, under reasonable error and delay.
1 April 2019 in IEEE Transactions on Green Communications and Networking
Future 5G and Internet of Things (IoT) applications will heavily rely on long-range communication technologies such as low-power wide area networks. In particular, LoRaWAN built on LoRa physical layer is gathering increasing interest, both from academia and industries, for enabling low-cost energy efficient IoT wireless sensor networks for, e.g., environmental monitoring over wide areas. While its communication range may go up to 20 kilometers, the achievable bit rates in LoRaWAN are limited to a few kilobits per second. In the event of collisions, the perceived rate is further reduced due to packet loss and retransmissions. Firstly, to alleviate the harmful impacts of collisions, we propose a decoding algorithm that enables to resolve several superposed LoRa signals. Our proposed method exploits the slight desynchronization of superposed signals and specific features of LoRa physical layer. Secondly, we design a full MAC protocol enabling collision resolution. The simulation results demonstrate that the proposed method outperforms conventional LoRaWAN jointly in terms of system throughput, energy efficiency as well as delay. These results show that our scheme is well suited for 5G and IoT systems, as one of their major goals is to provide the best trade-off among these performance objectives.
7 September 2020 in IEEE Access
In this paper, we investigate machine learning methods for enabling high performance non-cooperative spectrum sensing, for future cognitive radio systems. The fulfillment of sensing requirements is crucial for ensuring an efficient reuse of the scarce spectrum by unlicensed users, without causing harmful interference to primary users. In this work, we propose a deep convolutional neural network-based transfer learning framework for non-cooperative spectrum sensing in TV bands, applicable across various locations, wireless environments and even frequency assignments. Specifically, we design a four-layer convolutional neural network for limiting the computational costs while satisfying the sensing requirements, and apply transfer learning by freezing the first two convolutional layers. The performance of the proposed method is evaluated against benchmarks, based on over 29,000 spectrograms collected in UHF TV band from a recent measurement campaign. The experiments show that thanks to transfer learning, the proposed method is able to detect TV signals with high accuracy despite a significantly reduced amount of data, thereby providing a high adaptability to various locations, environments, and frequencies. Furthermore, the proposed method with transfer learning not only guarantees the sensing requirements but also realizes up to 94% reduction of training time of the network, as well as 20% reduction of the required sensing time, compared to the case without transfer learning.
6 April 2021 in IEEE Access
We investigate the issue of global energy efficiency optimization in a multi-beam low Earth orbit (LEO) satellite communication system. Current terrestrial networks provide high-quality and low cost communication mainly in densely populated areas. However, the cost of extending wideband coverage to remote areas is unaffordable. LEO satellites provide a low cost solution for offering global coverage by supporting terrestrial networks. We consider downlink transmissions in Ka-band, where a LEO satellite transmits to access points or users directly. Impairments due to Ka-band channels, inter-beam interference as well as Doppler effects are taken into account in our mathematical model. We formulate the problem of jointly optimizing beam assignment and power allocation for maximizing global energy efficiency. Given the intractability of this problem, we propose to divide it into two subproblems: first, beam assignment optimization under fixed power per beam, and second, power allocation optimization under fixed beam assignment. We devise two algorithms, beam-wise power optimization and equal power optimization. These two algorithms solve the subproblems, beam assignment and power allocation, in a different way. Numerical results show that our proposed methods can greatly improve the global energy efficiency compared to the baseline method with a fixed power per beam.