20 January 2021 in IEEE Access
Accurate topology is the basis of fine management and safe operation of distribution network. With the development of distributed generation, more and more users participate in the distribution network, which makes the flow direction of distribution network more complex and brings some difficulties to the topology identification of distribution network. The existing distribution network topology identification methods lack of multi period measurement data, and the utilization rate of multi-user data is low, which leads to the low accuracy of distribution network topology identification. To solve this problem, a distribution network topology identification method based on multi-user fusion data is proposed. Firstly, the existing distribution network measurement system is analyzed, and the data and characteristics that can be collected in the actual project are obtained. Then, according to the characteristics of different data sampling frequency and accuracy, multi-user data fusion is carried out, and a PMU based multi-user data time scale alignment method and a pseudo measurement generation method based on linear extrapolation are proposed. Finally, an optimization model of distribution network topology identification based on multi-user and multi period fusion data is proposed. By minimizing the error between the measured value and the estimated value in several time periods, the model realizes the identification of distribution network topology. Simulation results show that the method is correct and effective.
31 July 2023 in E3S Web of Conferences
The permanent ground displacement of geological disasters is the main reason inducing large additional axial stress of pipelines. This paper presents a surface displacement measurement method above the pipeline based on SBAS-InSAR remote sensing technology, which realizes millimeter-level high-precision monitoring of surface displacement of pipeline in kilometer range. Based on the spatial coordinate data of the pipeline center line and the geometric feature data of the pipeline, combined with the cubic spline interpolation algorithm, a reconstruction method of the pipeline three-dimensional space routing is proposed. Considering the real routing of the pipeline and the process load conditions such as temperature and pressure, the finite element model of pipeline stress analysis is established by using the space pipe element and the nonlinear pipe soil element. Taking the remote sensing landslide displacement as the accurate boundary condition, the calculation method of pipeline stress in landslide section is proposed. The practice of a high-risk landslide section in Liangxiang-Xishatun of Shaanxi-Beijing Pipeline from 2021 to 2022 shows that the maximum relative error between the pipeline stress results obtained by this method and the distributed strain gauge monitoring results does not exceed 16%, which can effectively realize the spatial reconstruction and safety evaluation of the pipeline stress state in the landslide section, and provide a technical basis for the establishment of digital twins of pipeline safety state in future geological disaster sections.
22 July 2025 in IEEE Access
Presents corrections to the paper, (Correction to “Distribution Network Topology Identification Considering Nonsynchronous Multi-Prosumer Data Measurement”).