6 August 2022 in Energy Conversion and Management
29 December 2023 in Mechanical Systems and Signal Processing
23 March 2020 in Physical Review Applied
In this paper, the physics of horizontally polarized shear waves traveling across a locally resonant metasurface in an unconsolidated granular medium is experimentally and numerically explored. The metasurface is comprised of an arrangement of subwavelength horizontal mechanical resonators embedded in a granular layer made of silica microbeads. The metasurface supports a frequency-tailorable attenuation zone induced by the translational mode of the resonators. The experimental and numerical findings reveal that the metasurface not only backscatters part of the energy but also redirects the wave front underneath the resonators, leading to a considerable amplitude attenuation at the surface level, when all the resonators have similar resonant frequency. A more complex picture emerges when using resonators arranged in a so-called graded design, e.g., with a resonant frequency increasing or decreasing throughout the metasurface. Unlike the mechanism observed in a bilayered medium, shear waves localized at the surface of the granular material are not converted into bulk waves. Although a detachment from the surface occurs, the depth-dependent velocity profile of the granular medium prevents the mode conversion and the horizontally polarized shear wave front returns to the surface. The outcomes of our experimental and numerical studies allow for understanding the dynamics of wave propagation in resonant metamaterials embedded in vertically inhomogeneous soils and, therefore, may be valuable for improving the design of engineered devices for ground-vibration and seismic wave containment.
26 December 2019 in Physical Review Research
We present a proof of concept of elastic immersive wave experimentation. A physical experiment of finite volume is connected with a numerical domain via the novel theory of immersive boundary conditions. We show that by applying the incident traction measured at the free surface of a solid target, we can completely cancel unwanted boundary reflections in the physical domain. The propagating waves can then seamlessly interact with a virtual, numerical domain while we fully account for long-range interactions between the two domains. Utilizing a laser Doppler vibrometer, we can accurately record the three-component particle motion of the wave field at the surface of a thin aluminum beam. The recordings are used to iteratively construct the immersive boundary conditions which are applied to the lateral ends of the beam by three-component piezoelectric actuators. Our one-dimensional experimental results show that we can actively cancel the waves reflected at the free-surface end of the aluminum beam for individually excited, broadband longitudinal and flexural wave modes, as well as for the simultaneous excitation of the two. Finally, we introduce interactions between the physical and a desired numerical domain, thereby virtually extending the physical aluminum beam.
19 July 2021 in Geophysical Journal International
SUMMARY: An important step in the processing of seismic data that are recorded at the free surface is the isolation of the primary incident wavefield from the total recorded wavefield (which is contaminated with the immediate reflections off the free surface). We present a 3-D wavefield reconstruction technique, based on numerical wavefield injection along a closed boundary, that allows us to isolate this primary wavefield from measurements at the free surface. The technique consists of injecting only the three-component particle velocity recordings acquired at the free surface into a numerical wavefield simulation, and additionally requires information about the medium properties. The result of our proposed procedure is the separation of elastic waves into their first-order incident and reflected constituents, even when the recording or injection surface has sharp corners. With the use of synthetic data it is shown that the method achieves close to numerically exact wavefield separation, provided that the true elastic model in the interior is used. In practice, the parameters for a homogeneous elastic model can be determined efficiently from the surface data itself using an optimization scheme. Finally, the wavefield separation technique is successfully applied to experimental data, with particle velocity recordings acquired along five faces of a cubic granite rock volume. In addition to characterizing materials in laboratories, the presented technique has applications in numerical modelling and in so-called immersive experimentation, where the incident field is required to immerse an elastic object in an arbitrary larger, virtual elastic environment.