17 January 2017 in IEEE Transactions on Control Systems Technology
In this paper, a predictive trajectory guidance and control framework is proposed that enables the safe operation of autonomous and semiautonomous vehicles considering the constraints of operating in dynamic public traffic. The core module of the framework is a nonlinear model predictive guidance module that uses a computationally expedient curvilinear frame for the description of the road and of the motion of the vehicle and other objects. The module enforces constraints generated from information about obstacles/other vehicles/objects, public traffic rules for speed limits and lane boundaries, and the limits of the vehicle's dynamics. The module can be configured in two basic modes. The first is a tracking mode, where the control inputs computed by the model predictive guidance module act as references for traditional lower level control systems. The second is a planning mode, where the traffic-optimal state trajectories computed by the model predictive control are reinterpreted for planning the optimal path and speed, which in turn can be tracked by an elaborate speed and path tracking controller. The performance of most aspects of the proposed scheme is illustrated by considering various simulations of the control framework applied to a high-fidelity vehicle dynamics model of the (semi-)autonomous vehicle in typical public driving events, such as intersections, passing, emergency braking, and collision avoidance. The feasibility of the proposed control framework for real-time application is highlighted with the discussions of the computational execution times observed for these various scenarios.
18 July 2018 in IEEE Transactions on Intelligent Transportation Systems
This paper outlines a predictive maneuver-planning method for autonomous vehicle navigating public highway traffic. The method integrates discrete maneuvering decisions, i.e., lane and reference speed selection automata, with a model predictive control-based motion trajectory-planning scheme. A key notion is to apply a predictive reference speed pre-planning for each lane at each time step of a selected prediction horizon. This is done based on the predicted likely motion of the autonomous vehicle and other object vehicles subject to sensor noise and environmental disturbances. Then, an optimization problem is configured that computes safe, sub-optimal plans for the trajectories of both the motion states (and inputs) and maneuver references for the prediction horizon to accomplish maneuvers like lane keeping, lane change, or obstacle avoidance. While a first formulation of the problem results in a mixed-integer nonlinear programming problem, it is shown that a relaxation can be adopted that reduces the computational complexity to a low-order polynomial time nonlinear program that can be solved more efficiently. Through simulation of a series of multi-lane highway scenarios and comparison with one-maneuver planning approach and an adaptive cruise control approach, the proposed predictive maneuver planning is illustrated to better accommodate the traffic environment with feasible execution time. Also, the reference speed pre-planning improves the optimality and the robustness of the maneuver decision in trajectory planning without adding computational complexity to the optimization problem.