The utilization of various agricultural residue ash as a pozzolanic material has the potential to reduce both the environmental impact and cost associated with building materials. In this paper, the authors studied the strength and permeability of mortar using different percentages of rice straw ash (RSA) as cement replacement and the possibilities of using RSA as a pozzolanic material. Locally available rice straws were burnt at a temperature of 600°C and ground to make RSA. The chemical and physical properties of RSA were studied and the outcome shows that the ash contains about 76% of silica in it. This investigation further focused the strength and water permeability of mortar using RSA, which demonstrates that up to 10% replacement both the strength and permeability have a better result than that of control specimen.
1 January 2013 in International Journal of Engineering and Technology
This study explains the influence of different temperature on the engineering properties of rice straw ash (RSA) and its reactivity as a pozzolanic material. Rice straw ash is used as natural pozzolana, prepared by burning at open atmosphere and three different controlled temperatures (400 °C, 600 °C and 750 °C), as this process is economic. For construction purposes, it will be difficult to extract huge amounts of silica material from rice straw by putting it in acid or basic treatment. The physiological and mineralogical aspects of rice straw ash samples were studied throughout the research. The particular size analysis and field emission gun-scanning electron microscope (FEG-SEM) identify that that the average diameter of RSA particles prepared at 400 °C to 750 °C, are within the range of 400–800 nm. X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and Fourier Transform Infra-Red Spectroscopy (FTIR) analysis ratify that the main composition of RSA is silica. And most of the silica particles are amorphous and porous in nature, which fit the nature of a pozzolanic material. The pozzolanic reactivity of RSA shows that the compressive strength of RSA blended with lime mortar increases as the number of curing day increases.
1 December 2021 in Soil Dynamics and Earthquake Engineering
This paper represents an effort to study the bond characteristics of plain and noded bamboo splints embedded in cement-stabilised rammed earth (CSRE) blocks. A series of CSRE pullout test specimens and two species of bamboo, namely Melocanna Baccifera and Bambusa Balcooa having an average tensile strength of 384 and 310 MPa, respectively, were fabricated using 4–10% Portland cement. These bamboo species are commonly available and widely used for construction in the north-eastern part of India. Besides considering the effects of soil strength, cement content, splint size and type on bond force and slip, the effect of embedded area was also briefly considered as part of the test programme. The test result showed that pullout bond resistance is correlated to rammed earth compressive strength, splint size and type, and embedded area.