We propose a novel wearable knee joint angle monitoring sensor based on the Mach-Zehnder interferometer (MZI) using a triple-clad fiber (TCF), which is fabricated by directly fusing a triple-clad fiber between two single-mode fibers (SMFs). The varying motion angle of knee joint will cause various optical path differences between the fiber core mode and the cladding modes, which will lead to the wavelength shifting of the MZI. Experimental results show that the sensor can measure the bending angles of the knee joint in the range from 40 ° to 90 °. When the knee joint angle changes from 65 ° to 90 °, the angle sensitivity can reach 569 pm/degree, and the correlation coefficient can achieve 0.98. In addition, the temperature sensitivity of the proposed sensor is 69 pm/°C in the temperature range from 40 °C to 90 °C, which shows that this sensor is hardly sensitive to temperature. Thus, the cross-sensitivity effect between the temperature and curvature can be avoided. These advantages provide a potential application prospect in the areas of sports medicine rehabilitation and robot monitoring.
A highly sensitive temperature and refractive index (RI) sensor based on no-core fiber (NCF) cascaded with a balloon-shaped bent single-mode fiber (BSBSF) is proposed and demonstrated. The NCF can excite higher-order modes which will be concentrated and transmitted into the BSBSF due to the characteristic of self-imaging effect. The BSBSF has an excellent temperature performance due to the high thermo-optical coefficient and thermal expansion coefficient of the polymer coating. The NCF and BSBSF are both conducive to the excitation of higher-order modes, which induces the sensitivity of the sensor with an efficiency improvement. The experimental results show that the maximum temperature sensitivity is −3.19nm/∘C in the range of 22°C–83°C, which is the highest temperature sensitivity in the cascaded BSBSF structure to our best knowledge. In addition, the maximum RI sensitivity is 232.16 nm/RIU when the RI changes from 1.3234 to 1.3512. Compared with other cascaded BSBSF structures, this sensor has a higher temperature sensitivity and can be applicated in the prospects of food, biology, and environmental monitoring.