22 February 2012 in Journal of Microelectromechanical Systems
The impact of device operating parameters on the ON-state resistance (RON) of microelectromechanical relays with tungsten (W) electrodes is reported. Due to the susceptibility of W to oxidation, RON increases undesirably over the device operating cycles. This issue is aggravated by Joule heating when the relay is in the on state. The experimental results confirm that shorter ON time, as well as shorter off time, provides for more stable RON with respect to the number of ON/OFF switching cycles.
25 February 2010 in IEEE Electron Device Letters
A dual-ended (¿seesaw¿) relay design is proposed for ultralow-power digital logic applications. Fabricated seesaw relays demonstrate a perfectly complementary switching behavior that is symmetric about V DD/2, with extremely steep switching behavior (< 0.1 mV/dec) and low on -state resistance (< 1 k¿). The perfectly complementary and symmetric operation provides for maximum operating voltage margin and minimal crowbar current, as evidenced by an abrupt inverter voltage transfer characteristic.
29 May 2014 in IEEE Transactions on Electron Devices
Gate-all-around (GAA) MOSFETs relevant for the 11.9-nm CMOS technology node are optimized with device dimensions following the scale length rule. Variability in transistor performance due to systematic and random variations is estimated with the aid of TCAD 3-D device simulations, for these well-tempered GAA structures. The tradeoff between read stability and write-ability of 6-T static RAM cell designs implemented with GAA MOSFETs with either square or rectangular nanowire channel regions is then investigated, and a calibrated transistor I-V compact model is used to estimate cell yield. The results indicate that a rectangular (thin and wide) channel design achieves the optimal balance between the read yield and write yield and hence provides for the lowest minimum cell operating voltage, estimated to be ~0.45 V, as well as smaller cell area.
28 June 2010 in IEEE Electron Device Letters
Four-terminal-relay inverter circuit characteristics are investigated. To achieve maximum noise margin and zero crowbar current while allowing for relay-to-relay variations, the optimal biasing scheme provides for switching that is symmetric about VDD/2 with minimum hysteresis and no possibility of both the pull-down and pull-up devices being on simultaneously.
9 January 2012 in IEEE Electron Device Letters
Multiple-input relays are proposed to enable more compact implementation of digital logic circuits, and the first functional prototypes are presented. A relay with three equally sized input electrodes is demonstrated to perform various three-input logic functions, with a delay that can be well predicted by a lumped-parameter model. Relays with differently sized input electrodes can be used to perform more complex functions. A flash-type analog-to-digital converter is presented as one example.