10 June 2016 in Nature Communications
AMAlejandro Martinez-Garcia
Alejandro Martinez-Garcia
+9
Hydrogen evolution reaction is catalysed efficiently with precious metals, such as platinum; however, transition metal dichalcogenides have recently emerged as a promising class of materials for electrocatalysis, but these materials still have low activity and durability when compared with precious metals. Here we report a simple one-step scalable approach, where MoOx/MoS2 core-shell nanowires and molybdenum disulfide sheets are exposed to dilute aqueous hydrazine at room temperature, which results in marked improvement in electrocatalytic performance. The nanowires exhibit ∼100 mV improvement in overpotential following exposure to dilute hydrazine, while also showing a 10-fold increase in current density and a significant change in Tafel slope. In situ electrical, gate-dependent measurements and spectroscopic investigations reveal that hydrazine acts as an electron dopant in molybdenum disulfide, increasing its conductivity, while also reducing the MoOx core in the core-shell nanowires, which leads to improved electrocatalytic performance.
4 March 2016 in Science Advances
Graphitic materials are essential in energy conversion and storage because of their excellent chemical and electrical properties. The strategy for obtaining functional graphitic materials involves graphite oxidation and subsequent dissolution in aqueous media, forming graphene-oxide nanosheets (GNs). Restacked GNs contain substantial intercalated water that can react with heteroatom dopants or the graphene lattice during reduction. We demonstrate that removal of intercalated water using simple solvent treatments causes significant structural reorganization, substantially affecting the oxygen reduction reaction (ORR) activity and stability of nitrogen-doped graphitic systems. Amid contrasting reports describing the ORR activity of GN-based catalysts in alkaline electrolytes, we demonstrate superior activity in an acidic electrolyte with an onset potential of ~0.9 V, a half-wave potential (E½) of 0.71 V, and a selectivity for four-electron reduction of >95%. Further, durability testing showed E½ retention >95% in N2- and O2-saturated solutions after 2000 cycles, demonstrating the highest ORR activity and stability reported to date for GN-based electrocatalysts in acidic media.
19 November 2015 in Journal of Materials Chemistry A
We have developed binder-free solid-state electric double layer supercapacitors using freestanding porous carbon nanofiber electrodes fabricated using electrospinning and silica-based ionic liquid gel electrolytes. To ensure close electrode/electrolyte contact and efficient transport of ions for high power operation, we fabricated our electrodes by uniformly filling freestanding samples of porous carbon nanofiber mats with a blend of silica sol–gel precursor and ionic liquid electrolyte, which were then appropriately dried/gelled to form all-solid supercapacitors. Two different carbon nanofiber samples have been investigated with high specific surface areas of 1218 m2 g−1 and 2282 m2 g−1. The resulting solid-state supercapacitor can operate in a large voltage window of 3.5 V. We achieved specific capacitance (Csp) and specific energy (Ecell, based on the mass of the two electrodes) of up to 144 F g−1 and 61 W h kg−1 respectively, rivaling that of lead-acid batteries, with a high active material (carbon only) loading of 3–5 mg cm−2.
29 September 2015 in The Journal of Physical Chemistry B
13 November 2013 in ECS Journal of Solid State Science and Technology