Frozen fractured rock mass is often encountered during the implementation of geotechnical engineering in cold regions. The tensile strength parameters of frozen rock play an important role in the construction of rock slopes involving tensile failure. In order to study the tensile characteristics of a frozen fractured rock mass in a cold region, original rock specimens were mined and processed in the Yulong Copper Mine, and artificial, frozen fractured marble specimens were made. The effects of different ice-filled crack angles, lengths, and widths on the force–displacement curve and the tensile strength of frozen rock were studied by laboratory Brazilian splitting experiments and RFPA3D, and the evolution law of the tensile strength of frozen rock was revealed. At the same time, wing crack initiation and cracking mode after tensile failure were analyzed by high-speed camera; the whole process of the Brazilian splitting of frozen rock was reconstructed, and the development of microcrack initiation in frozen rock was analyzed. The following conclusions were drawn from the test results: the frozen rock specimens have typical brittle-failure characteristics. The tensile strength of frozen rock decreases gradually with the increase in the width and length of ice-filled cracks, and decreases first and then increases with the increase in the angle of the ice-filled crack. The ice-filled crack incurs damage first, and then the wing cracks start from the tip of the ice-filled crack and extend continuously. The tensile strength of frozen rock is significantly affected by the angle and length of ice-filled cracks.
The propagation mechanism of explosion stress waves in frozen rock mass is the main factor affecting the blasting efficiency and safety construction of strip mines in alpine cold regions. In order to study explosion stress wave propagation and crack extension in the blasting process of frozen rock mass with ice-filled cracks, RFPA2D is adopted to simulate the influence of the geometric parameters of ice-filled cracks (ice-filled crack thickness d, normal distance R from blasting hole to the ice-filled crack, and ice-filled crack angle α), loading intensity and loading rate on the explosion stress wave propagation effect and the damage range. The results show: The attenuation trend of explosion stress waves decreases gradually with an increase of thickness (e.g., In the case of R is 0.2 m, when d is 0.02 m, 0.04 m, and 0.08 m, the calculated attenuation factor of the minimum principal stress peak value is 7.128%, 18.056%, and 30.035%, respectively), and it decreases slightly with an increase of normal distance and ice-filled crack angle. The damage elements range of the ice-filled crack decreases when the ice-filled crack thickness and normal distance increases. The loading intensity and the loading rate have a significant influence on blasting hole fracture patterns. The ice-filled crack has a guiding effect on the growth of blasting cracks at the blasting hole. Nevertheless, the existence of ice-filled cracks inhibits the propagation of explosion stress waves in frozen rock mass.
4 September 2025 in Rock Mechanics and Rock Engineering