1 April 2024 in Physics of Fluids
To investigate the adverse effects of rotating stalls on the pressure pulsation characteristics of a pump-turbine in pump mode, an unsteady numerical simulation was carried out by applying the partially averaged Navier–Stokes turbulence model. The numerical methods were carefully verified, and the onset flow rate of the hump at the performance curve and heads were in good agreement with the experimental data. The rotating stall appeared in the guide vane when the flow rate ranged from 0.514 to 0.887 times the best efficiency point (QBEP), with a frequency of 11.7% times the rotational frequency. In the period of a rotating stall, a sudden intensive pressure pulsation in the guide vane channel was observed and named as the component of the broadband frequency, and its corresponding flow mechanism was explained as the vortex evolution between the adjacent guide vane blades based on the dynamic mode decomposition technology. There were three distinct characteristics of broadband frequency: (i) intermittent occurrence when the rotating stall cell propagated to the current flow channel, (ii) a wide range of the frequency varying with flow rate, (iii) a considerable amplitude, e.g., reaching 21.1%–42.2% times that of the rotating stall frequency. In addition, both the frequency range and amplitude of the broadband frequency gradually decreased as the flow rate increased to 0.887QBEP. This study clarified the internal flow mechanism and frequency behaviors of a sudden intensive pressure pulsation if a rotating stall occurred, which was important to assess the stability of pump-turbine units.
1 January 2025 in Physics of Fluids
Leading-edge (LE) cavitation of a blade is a frequent occurrence in hydraulic machinery during off-design operation, often accompanied by unsteady flow and high-amplitude noise. To quantitatively assess the noise caused by cavitation, the Powell vortex sound theory was refined to consider the non-uniform distribution of sound speed and the compressibility effect resulting from mass transfer near the vapor–liquid interface. This led to the development of a new model capable of visualizing the spatiotemporal distribution of sound pressure in cavitating flows. Unsteady simulations were conducted on a hydrofoil at various cavitation numbers and were validated using experimental data. Three different types of sound sources were identified: unbalanced vortex force, non-uniform kinetic energy, and compressibility effect, with the compressibility effect being the dominant source under LE cavitation conditions. The sound pressure during cavitation exhibited dramatic fluctuations over time and was closely related to the spatial position, particularly peaking during the transient moments of LE cavitation break-off, with the highest sound pressure observed near the vapor–liquid interface. There was a strong correlation between sound pressure and vapor volume fraction, suggesting that cavitation noise is a result of the dynamic evolution of cavitation. As the cavitation number decreased from 2.02 to 1.04, the sound pressure level substantially increased, with an increment of up to 17 dB. This paper presents a method for simulating and visualizing near-field sound pressure considering cavitation, providing valuable insights into the relationship between LE cavitation and sound pressure levels.
11 September 2024 in International Journal of Multiphase Flow
6 September 2024 in International Journal of Multiphase Flow
1 September 2024 in Physics of Fluids
The discrete tone radiated from a cavitating tip vortex, known as “vortex singing,” was first recognized in 1989, but its sound generation mechanism has remained a mystery for over 30 years. In this Letter, by means of the correction for the cavitation bubble dynamics and the dispersion relation of cavity interfacial waves, we found that after the far-end disturbances propagate upstream, the whistling vortex should be triggered by near-end sound sources, the breathing mode waves. Further utilizing the theoretical solutions for singing lines and the potential singing cavitation number with frequency, we accurately identified all available tests for seeking the vortex singing over the past three decades, which not only demonstrates that the vortex singing frequency is only determined by the measurable mean cavity radius (rc), cavitation number (σ), and desinent cavitation number (σd) in experiments, but also responses to a long-standing perplexity: why such a best whistler is able to appear only within a narrow range of the cavitation number.
1 November 2024 in Physics of Fluids
This research integrates experimental visualization via high-speed photography with numerical simulations, leveraging large eddy simulation and the Schnerr–Sauer (S-S) cavitation model, to examine cavitation dynamics on a flat-plate hydrofoil across a range of tip clearance settings. We identify three distinct cavitation patterns caused by tip clearance (CT) in terms of the flow structures and interactions of tip leakage vortex cavitation, tip separation vortex cavitation (TSVC), and shear layer cavitation. The flat-plate hydrofoil demonstrates stronger TSVC and more pronounced vortex interactions compared to National Advisory Committee for Aeronautics 0009 hydrofoils. A phase diagram is established to predict the cavitation patterns of CT under different operational conditions of the cavitation number σ and the angle of attack α. We also observe a downwash effect from the vortices, influencing the cavitation length on the suction side of the hydrofoil. The findings are significant for optimizing hydrofoil designs in fluid machinery where effective cavitation management is critical.