1 January 2019 in NAVIGATION: Journal of the Institute of Navigation
Current standardization activities in the aeronautical community are paving the way to using multifrequency multiconstellation GNSS as a primary means of aircraft navigation. The increase in the number of satellites from different constellations as well as the increasing use of multiple frequency GNSS receivers promise improvements in the achievable accuracy in GNSS positioning. The effects of receiver antennas shall be investigated because of the stronger impact of possible imperfections on the overall error budget for multifrequency combinations. The scope of this paper is to show the possibility of properly modeling and indeed characterizing the antenna‐induced GNSS pseudorange errors, through simulations and electromagnetic measurement. An insight into antenna characteristics giving rise to such errors will be given, by analyzing the impact of the feeding technique on the achievable pattern uniformity and hence on antenna‐related pseudorange errors. The technique is then validated through GNSS field measurement.
27 June 2013 in IEEE Transactions on Antennas and Propagation
Multipath propagation limits the obtainable accuracy of antenna measurements in non-anechoic environments. For reliable results of the antenna radiation pattern, appropriate postprocessing of the acquired data should be performed in order to separate the line-of-sight signal from the multipath signals. In this paper, a measurement technique which facilitates the removal of multipath contributions during data postprocessing is described. This is achieved by measuring additional field data with multiple probe antennas such that enough information is available to resolve the direct contributions of the antenna under test and the multipath signals. The data so acquired is then processed by a well adapted plane wave based near-field far-field transformation algorithm, with the echo sources integrated by means of auxiliary sources. The performance of the technique is demonstrated using simulated and true echoic measurements for spherical and planar measurement geometries.
18 September 2012 in Advances in Radio Science
Near-field measurements are established techniques to obtain the far-field radiation pattern of an Antenna Under Test via near-field measurements and subsequent near-field far-field transformation. For measurements acquired in echoic environments, additional post-processing is required to eliminate the effects of multipath signals in the resulting far-field pattern. One of such methods models the measurement environment as a multiple source scenario whereby the collected near-field data is attributed to the AUT and some scattering centers in the vicinity of the AUT. In this way, the contributions of the AUT at the probe can be separated from those of the disturbers during the near-field far-field transformation if the disturber locations are known. In this paper, we present ways of modeling the scattering centers on equivalent surfaces such that echo suppression is possible with only partial or no information about the geometry of the scatterers.