Dairy cattle farms are continuously developing more intensive systems of management, which require higher utilization of durable and non-durable inputs. These inputs are responsible for significant direct and indirect fossil energy requirements, which are related to remarkable emissions of CO2. This study focused on investigating the indirect energy requirements of 285 conventional dairy farms and the related carbon footprint. A detailed analysis of the indirect energy inputs related to farm buildings, machinery and agricultural inputs was carried out. A partial life cycle assessment approach was carried out to evaluate indirect energy inputs and the carbon footprint of farms over a period of one harvest year. The investigation highlights the importance and the weight related to the use of agricultural inputs, which represent more than 80% of the total indirect energy requirements. Moreover, the analyses carried out underline that the assumption of similarity in terms of requirements of indirect energy and related carbon emissions among dairy farms is incorrect especially when observing different farm sizes and milk production levels. Moreover, a mathematical model to estimate the indirect energy requirements of dairy farms has been developed in order to provide an instrument allowing researchers to assess the energy incorporated into farm machinery, agricultural inputs and buildings. Combining the results of this two-part series, the total energy demand (expressed in GJ per farm) results in being mostly due to agricultural inputs and fuel consumption, which have the largest share of the annual requirements for each milk yield class. Direct and indirect energy requirements increased, going from small sized farms to larger ones, from 1302–5109 GJ·y−1, respectively. However, the related carbon dioxide emissions expressed per 100 kg of milk showed a negative trend going from class 9000 kg of milk yield, where larger farms were able to emit 48% less carbon dioxide than small herd size farm (43 vs. 82 kg CO2-eq per 100 kg Fat- and Protein-Corrected Milk (FPCM)). Decreasing direct and indirect energy requirements allowed reducing the anthropogenic gas emissions to the environment, reducing the energy costs for dairy farms and improving the efficient utilization of natural resources.
Dairy cattle farms are continuously developing more intensive systems of management which require higher utilization of durable and not-durable inputs. These inputs are responsible of significant direct and indirect fossil energy requirements which are related to remarkable emissions of CO2. This study aims to analyze direct energy requirements and the related carbon footprint of a large population of conventional dairy farms located in the south of Italy. A detailed survey of electricity, diesel and Liquefied Petroleum Gas (LPG) consumptions has been carried out among on-farm activities. The results of the analyses showed an annual average fuel consumption of 40 kg per tonne of milk, while electricity accounted for 73 kWh per tonne of milk produced. Expressing the direct energy inputs as primary energy, diesel fuel results the main resource used in on-farm activities, accounting for 72% of the total fossil primary energy requirement, while electricity represents only 27%. Moreover, larger farms were able to use more efficiently the direct energy inputs and reduce the related emissions of carbon dioxide per unit of milk produced, since the milk yield increases with the herd size. The global average farm emissions of carbon dioxide equivalent, due to all direct energy usages, accounted for 156 kg CO2-eq per tonne of Fat and Protein Corrected Milk (FPCM), while farms that raise more than 200 heads emitted 36% less than the average value. In this two-part series, the total energy demand (Part 1 + Part 2) per farm is mainly due to agricultural inputs and fuel consumption, which have the largest quota of the annual requirements for each milk yield class. These results also showed that large size farms held lower CO2-eq emissions when referred to the mass of milk produced.
A life cycle assessment (LCA) methodology was used to evaluate the cumulative energy demand and the related environmental impact of three large-power stand-alone photovoltaic (PV) irrigation systems ranging from 40 kWp to 360 kWp. The novelty of this analysis is the large power of these systems as the literature up to now is restricted to modeled PV pumping systems scenarios or small power plants, where the size can be a critical factor for energy and environmental issues. The analysis shows that the yearly embodied energy per unit of PV power ranged from 1306 MJ/kWp to 1199 MJ/kWp depending of the PV generator size. Similarly, the related yearly carbon dioxide impacts ranged from 72.6 to 79.8 kg CO2e/kWp. The production of PV modules accounted for the main portion (about 80%) of the primary energy embodied into the PV irrigation system (PVIS). The outcomes of the study also show an inverse trend of the energy and carbon payback times respect to the PV power size: In fact, energy payback time increased from 1.94, to 5.25 years and carbon payback time ranged from 4.62 to 9.38 years. Also the energy return on investment depends on the PV generator dimension, ranging from 12.9 to 4.8. The environmental impact of the stand-alone PV systems was also expressed in reference to the potential amount of electricity generated during the whole PV life. As expected, the largest PVIS performs the best result, obtaining an emission rate of 45.9 g CO2e per kWh, while the smallest one achieves 124.1 g CO2e per kWh. Finally, the energy and environmental indicators obtained in this study are strongly related to the irrigation needs, which in turn are influenced by other factors as the type of cultivated crops, the weather conditions and the water availability.
Mechanized milking has become widely used for buffaloes in Italy in recent years, thus improving the management and the productivity of farms. The apparent similarities between buffalo and cattle have often resulted in applying the same milking systems and techniques currently used for dairy cows. Considering the effect of mechanical milking on animal health, productivity, and welfare in intensive livestock farming, this study compares the effects of milking at low vacuum (36 kPa) and medium vacuum (42 kPa) on milk emission characteristics and milking system performance. Individual milk flow curves were registered to analyze milk yield, average flow rate, and milking time, and milking operations were recorded to evaluate the system performances. When using 36 kPa vacuum, a significant increase in milking time and in the lag time before milk ejection occurred, as well as a decrease in average flow rate and residual milk. However, the vacuum level did not influence both milk yield and milk ejection time. As a consequence of decreasing the vacuum level to 36 kPa, the milking system throughput was decreased at most by 5 buffalo/h.