This paper evaluated the effects of laser beam irradiation based surface modifications of Ti-10Mo alloy samples under either Ar or N2 environment to the corrosion resistance and cell integration properties. The surface morphology and element distributions of Ti-10Mo samples after laser surface treatments were evaluated using a scanning electron microscope, energy-dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy. Phase analysis was performed with x-ray diffraction. The electrochemical behavior of the Ti-10Mo samples was evaluated in simulated body fluid maintained at 37 ± 0.5 °C, and a cell-material interaction test was conducted using the MLO-Y4 cells. Laser surface modification in the Ar environment enhanced corrosion behavior, but did not affect the surface roughness, element distribution, or cell behavior, compared to the untreated samples. Processing the Ti-10Mo alloy in N2 formed a much rougher TiN surface that improved both the corrosion resistance and cell-material integration compared with the other two conditions.
The application of laser processing as a surface treatment method on oxide dispersion strengthened (ODS) Fe-14Cr ferritic alloys, Fe-14Cr-3W-0.3Ti-xY2O3 (x = 0.3, 0.6, 0.9) (wt%), was examined in this paper. The ODS ferritic alloys with different amount of Y2O3 particles were prepared by mechanical milling and subsequently consolidated by spark plasma sintering (SPS). The effect of surface laser processing on the corrosion behavior was investigated for these ODS alloys with different oxide contents. The corrosion behaviors of SPS consolidated ODS samples with subsequent laser melting/solidification were examined by the means of electrochemical tests and compared with the untreated ODS samples in salt water. Results indicated that for samples without laser treatment, powders are mainly in their elemental state. However, after laser processing, the formation of passive layer and the improvement in the corrosion resistance are noticeable. CALculation of PHAse Diagrams (CALPHAD) calculations were used to identify the equilibrium phases and compared well with the experimental results.