Silvia Rojas Rueda

Silvia Rojas Rueda

Auto-generated profile, based on publicly available information

Silvia Rojas Rueda

Division of Biomaterials, School of Dentistry, University of Alabama at Birmingham, Birmingham, AL 35209, USA

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2025 in Materials
Verified
Journal Article
Open access
PDF file
MHMohammed Hammamy
Mohammed Hammamy
SRSilvia Rojas Rueda
Silvia Rojas Rueda
APAntonio Pio
Antonio Pio
FRFabio Rizzante
Fabio Rizzante
NLNathaniel Lawson
Nathaniel Lawson
Two 3D-printed crown materials (Crown and Ceramic Crown) were examined to determine the best surface treatment and primers for bonding. Discs of the two materials were printed and mounted with their “intaglio” surfaces untouched. Half the specimens from each group were sandblasted with 50 µm alumina. Then, specimens were divided into four groups (n = 10): Gr1—no further treatment; Gr2—one coat of silane; Gr3—one coat of universal adhesive; Gr4—one coat of silane, then one coat of universal adhesive. Bond strength specimens were prepared with an Ultradent shear bond strength apparatus using Filtek Supreme composite. Specimens were stored for 8 weeks in 37 °C water. The specimens were debonded with a circular notched-edge blade applied at 1 mm/min, and the shear bond strength was calculated. The data were compared with a two-way ANOVA (factors: surface treatment and primer) and a Tukey post hoc analysis for both materials independently, with p < 0.01 considered meaningful. The filler content (burned ash) and resin content (FTIR) of the materials were determined. For both materials, factors surface treatment and primer were significant (p < 0.01), but their interaction was not (p = 0.43 for Crown and p = 0.34 for Ceramic Crown). Alumina air particle abrasion improved the bond strength for both materials. The Tukey post hoc analysis grouped primer treatments into the same statistically different groups for both materials: Gr1 and Gr2 < Gr3 and Gr4. The filler percentage of Crown was 32.7% and Ceramic Crown was 48.2%. Resin content was similar for both materials. The most effective method to bond to 3D-printed crowns (regardless of filler percentage) was to sandblast with 50 µm alumina and apply a layer of adhesive (with or without previous application of silane).