Jag Parvesh Dahiya

Jag Parvesh Dahiya

Auto-generated profile, based on publicly available information

Jag Parvesh Dahiya

Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, India

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 July 2018 in Materials Research Express
Verified
Journal Article
Closed access
PDF file
RARamkishor Anant
Ramkishor Anant
JDJag Parvesh Dahiya
Jag Parvesh Dahiya
BAB. P. Agrawal
B. P. Agrawal
PGPrakriti Kumar Ghosh
Prakriti Kumar Ghosh
RKRavindra Kumar
Ravindra Kumar
KKKaushal Kumar
Kaushal Kumar
A study of hot corrosion kinetics of dissimilar weld joints of 304LN austenitic stainless steel and HSLA steel, which are welded by commonly used arc welding processes such as P-GMAW (pulsed current gas metal arc welding), GTAW (tungsten inert gas welding), and SMAW (shielded metal arc welding), has been conducted. The joints were then exposed to a molten salt environment of K2SO4 + NaCl (50%) at 923 K (650 oC) under cyclic conditions, that is, 1 hr of heating and subsequently 20min of cooling. A gravimetric analysis was conducted and it was observed that salt-coated samples follow a parabolic rate law. SEM/EDAX, XRD, and line mapping were used to systematically characterize the resulting oxide scale in the dissimilar weld joints. The influence of the molten salt environment on the hot corrosion behavior of dissimilar welded specimens is also discussed. From the hot corrosion studies, it was concluded that the longer the duration of exposure to molten salt, the higher the weight gain by the weldment.

1 May 2025 in Science and Technology of Welding and Joining
Verified
Journal Article
Closed access
NPNeelima Patnaikuni
Neelima Patnaikuni
JDJag Parvesh Dahiya
Jag Parvesh Dahiya
MAMurugaiyan Amirthalingam
Murugaiyan Amirthalingam
Amitava DeAmitava De
Amitava De
Numerical heat transfer models are increasingly used to compute the temperature field, melt pool dimensions and thermal cycles for laser powder bed fusion but huge computational demand of these models is a perpetual challenge. We present a recently introduced novel dynamic meshing strategy to preserve a fine meshed region always beneath the laser beam and a gradually coarsened region away from the beam thereby notably reducing the overall model size and computational demand. Probed over a wide range of conditions, we show a reduction of the computational time and volume by nearly 6 to 10 times vis-à-vis little loss of accuracy in the computed results with the dynamic meshing strategy compared to traditional approaches with static uniform meshing.