This review critically analyzes degradable biomedical elastomers, focusing on their degradation, synthesis, microstructure, and role in tissue repair. It guides experts in balancing degradation with tissue repair for improved applications.
Developing patches that effectively merge intrinsic deformation characteristics of cardiac with superior tunable mechanical properties remains a crucial biomedical pursuit. Currently used traditional block-shaped or mesh patches, typically incorporating a positive Poisson's ratio, often fall short of matching the deformation characteristics of cardiac tissue satisfactorily, thus often diminishing their repairing capability. By introducing auxeticity into the cardiac patches, this study is trying to present a beneficial approach to address these shortcomings of the traditional patches. The patches, featuring the auxetic effect, offer unparalleled conformity to the cardiac complex mechanical challenges. Initially, scaffolds demonstrating the auxetic effect were designed by merging chiral rotation and concave angle units, followed by integrating scaffolds with a composite hydrogel through thermally triggering, ensuring excellent biocompatibility closely mirroring heart tissue. Tensile tests revealed that auxetic patches possessed superior elasticity and strain capacity exceeding cardiac tissue's physiological activity. Notably, Model III showed an equivalent modulus ratio and Poisson's ratio closely toward cardiac tissue, underscoring its outstanding mechanical potential as cardiac patches. Cyclic tensile loading tests demonstrated that Model III withstood continuous heartbeats, showcasing outstanding cyclic loading and recovery capabilities. Numerical simulations further elucidated the deformation and failure mechanisms of these patches, leading to an exploration of influence on mechanical properties with alternative design parameters, which enabled the customization of mechanical strength and Poisson's ratio. Therefore, this research presents substantial potential for designing cardiac auxetic patches that can emulate the deformation properties of cardiac tissue and possess adjustable mechanical parameters.
The unsatisfactory mechanical performance at high temperatures limits the broad application of 3D‐printed aluminum alloy structures in extreme environments. This study investigates the mechanical behavior of 4 different lattice cell structures in high‐temperature environments using AlSi12Fe2.5Ni3Mn4, a newly developed, heat‐resistant, high‐strength, and printable alloy. A novel Antisymmetric anti‐Buckling Lattice Cell (ASLC‐B) based on a unique rotation reflection multistage design is developed. Micro‐CT (Computed Tomography) and SEM (Scanning Electron Microscope) analyses revealed a smooth surface and dense interior with an average porosity of less than 0.454%. Quasi‐static compression tests at 25, 100, and 200 °C showed that ASLC‐B outperformed the other 3 lattice types in load‐bearing capacity, energy absorption, and heat transfer efficiency. Specifically, the ASLC‐B demonstrated a 51.56% and 44.14% increase in compression load‐bearing capacity at 100 and 200 °C compared to ASLC‐B(AlSi10Mg), highlighting its excellent high‐temperature mechanical properties. A numerical model based on the Johnson‐Cook constitutive relationship revealed the damage failure mechanisms, showing ASLC‐B's effectiveness in preventing buckling, enhancing load‐transfer efficiency, and reducing stress concentrations. This study emphasizes the importance of improving energy absorption and mechanical performance for structural optimization in extreme conditions. The ASLC‐B design offers significant advancements in maintaining structural integrity and performance under high temperatures.
In the functional structures of aerospace carbon fiber‐reinforced polymer (CFRP) composites, achieving the simultaneous enhancement of electromagnetic interference (EMI) shielding performance and mechanical properties remains a critical challenge. In this work, an efficient CFRP interfacial modification strategy combining electrodeposition with vacuum heat treatment is proposed to address the inherent trade‐off between shielding effectiveness and mechanical performance of CFRP‐EMI shielding materials. A neuronal‐like micro‐nano Ni coating is fabricated on carbon fiber surfaces to enhance electromagnetic shielding capacity. The formed discontinuous Ni─C miscible regions, Ni/NiO/C heterogeneous multiphases, and nanoporous structures effectively improve the interfacial integration between the matrix and coating, as well as the mechanical properties. In the X‐band, the reflection loss, absorption loss, and total EMI shielding effectiveness are increased by 33%, 18.6%, and 22.5%, respectively, while the ductility is improved by 201.78%, realizing the synergistic promotion of electromagnetic shielding and mechanical performance. Combined with experimental characterization and molecular dynamics analysis, the growth mechanism of polycrystalline phases during interfacial evolution is further clarified. This study innovatively proposes a high‐efficiency and controllable design strategy for advanced CFRP‐EMI functional materials, which provides a promising solution for the application of lightweight, high‐strength, and self‐adaptive electromagnetic shielding in the design of next‐generation multifunctional aerospace structures.