Luca de Sanctis

Luca de Sanctis

Auto-generated profile, based on publicly available information

Luca de Sanctis

University of Napoli Parthenope

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2006 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
LSLuca de Sanctis
Luca de Sanctis
AMAlessandro Mandolini
Alessandro Mandolini
The conventional design of a piled foundation is based on a bearing capacity approach, and neglects the contribution of the raft. As a consequence, piled foundations are usually designed by overconservative criteria. With respect to the conventional approach, a more rational and economical solution could be obtained by accounting for the contribution of the raft toward the overall bearing capacity, but this potential is not exploited due to the lack of theoretical and experimental research on the behavior of piled rafts at failure. Based on both experimental evidence and three-dimensional finite element analyses, a simple criterion is proposed to evaluate the ultimate vertical load of a piled raft as a function of its component capacities, which can be simply evaluated by the conventional bearing capacity theories. The results presented in the paper thus provide a guide to assess the safety factor of a vertically loaded piled raft

1 May 2009 in Canadian Geotechnical Journal
Verified
Journal Article
Closed access
RMRosa Maria Stefania Maiorano
Rosa Maria Stefania Maiorano
LSLuca de Sanctis
Luca de Sanctis
SAStefano Aversa
Stefano Aversa
AMAlessandro Mandolini
Alessandro Mandolini
This paper presents the results of an extensive parametric study on single piles and pile groups embedded in a two-layer subsoil profile, and is aimed to evaluate kinematic bending moments developing during earthquakes. A quasi three-dimensional finite element program has been used to perform dynamic analyses in the time domain. Piles have been considered as elastic beams, while the soil has been modelled using a linear elastic constitutive model. The aims of the paper are: (i) to evaluate kinematic bending moments in single piles and pile groups with dynamic analyses in the time domain, in different subsoil conditions; (ii) to review some existing design methods; (iii) to propose a simplified analysis procedure to evaluate maximum kinematic bending moments between two subsequent soil layers. The results of the dynamic analyses have shown that some of the simplified approaches provided in published literature tend to be conservative and can predict bending moments at the soil-layer interface with adequate accuracy only within certain depths of the soil layer interface. On the basis of the obtained results, a modified criterion to evaluate the transient peak bending moments at interfaces between layers is proposed.

27 July 2010 in Earthquake Engineering & Structural Dynamics
Verified
Journal Article
Closed access
PDF file
LSLuca de Sanctis
Luca de Sanctis
RMRosa M. S. Maiorano
Rosa M. S. Maiorano
SAStefano Aversa
Stefano Aversa

1 August 2008 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
LSLuca de Sanctis
Luca de Sanctis
GRGianpiero Russo
Gianpiero Russo
In this paper the main criteria adopted for the design and some aspects of the observed behavior of the piled foundations of a cluster of circular steel tanks are reported. They were designed to store sodium hydroxide, a toxic liquid with a unit weight of 15.1 kN∕ m3 . Shallow foundations would have been safe against a bearing capacity failure, while the predicted settlement was beyond the allowed limit. Accordingly piles were designed to reduce the settlement and improve the overall performance of the foundations. While conventional capacity based design approach led to a total of 160 piles to support the five tanks the settlement based design approach led to a total of 65 piles achieving significant savings on the cost of the project. The settlements of four out of the five tanks were measured and for two out of the five tanks the load sharing among the raft and the piles was also observed. Both the analyses carried out at the design stage and the back-analyses of the observed behavior were based on the...

10 June 2008 in Journal of Statistical Physics
Verified
Journal Article
Closed access
PDF file
LSLuca De Sanctis
Luca De Sanctis
FGFrancesco Guerra
Francesco Guerra

1 March 2013 in Soil Dynamics and Earthquake Engineering
Verified
Journal Article
Closed access
Raffaele Di LaoraRaffaele Di Laora
Raffaele Di Laora
LSLuca de Sanctis
Luca de Sanctis