1 January 2020 in IOP Conference Series: Materials Science and Engineering
This paper deals with the design of a test bench for an unnamed aerial vehicle UAV type convertiplane with controlled electric drives and tilt rotors (propellers) executed on a quadcopter pattern. This experimental test bench provides an intermediate step between simulation process and real time flight of the UAV, it allows to test its and evaluate solutions in safe and controllable environment conditions. Thus, the development of methods of state estimation and control UAV becomes possible, in addition the developed system can be used for teaching about the basis of automatic control in multirotor aerial vehicles. The test bench presented in this paper contains a convertiplane type quadcopter attached on the base through a universal joint which let the UAV be able to rotate around plane axes x and y, while the vertical axis z is fixed, in turn this part of the system is fixed through a bar connected with a linear guideway block that moves over a linear guide which depends of the generated lifting force by the UAV. To determinate the travelled road of the system and the different parameters of the behavior of the convertiplane it has been also implemented a measuring system.
8 February 2017 in MATEC Web of Conferences
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
1 January 2021 in IOP Conference Series: Materials Science and Engineering
This paper deals with the validation of a hovering control algorithm for a mobile aerial platform executed on a quadcopter pattern. In order to test and evaluate the proposed hovering algorithm in a safe and controllable environment conditions, an experimental test bench has been introduced. As part of the hovering control algorithm implementation process, a brief description of the dynamics and control laws of the quadcopter is presented. The considered control technique in this paper is based on PID control method. A program code has been written using Arduino IDE based on Arduino UNO microcontroller. A description of the conducted indoor experiment for the validation of the hovering algorithm, and also the main results of the performed practical experiment are presented
1 April 2024 in Enfoque UTE
In this paper, an assessment of the state of coastal territories of Ecuador monitoring issue is conducted. The use of an autonomous robotic aerial platform is proposed as a technical solution to enhance the efficiency of remote surveillance missions performed by national security services along coastline. Considering the UAV nonlinear flight dynamics, as well as the missing information of the environment, is designed a UAV hierarchical control structure composed of an adaptive PID based MPC control strategy. The implementation of an adaptive PID based MPC controller leads to significantly improve the UAV optimal trajectory tracking task, as well as satisfy properties such as adaptiveness, self-learning, and capability of handling uncertainties caused by the unpredictable behavior of sea currents and wind loads retaining robust performance features. In this work, the investigation of external disturbances on UAV stabilization and positioning accuracy considers swirling wind flows and short-term wind gusts. These correspond to deterministic and random processes, are mathematically represented as trigonometric functions with random amplitudes determined by the gust coefficients and the wind loading periods of the pulses. The established range is given by a set of several observations of wind loads in the coastal territories of Ecuador. The analyzed data is collected from the database of national meteorological stations. Finally, the simulation process of the perturbed controlled motion of the UAV along a segmented linear trajectory, as well as the data analysis and graphics are carried out in the MATLAB environment.