1 June 2020 in IEEE Wireless Communications Letters
This paper investigates multiple intelligent reflecting surfaces (IRSs) aided wireless network, where the IRSs are deployed to cooperatively assist communications between a multi-antenna base station (BS) and the multiple single-antenna cell-edge users. We aim at maximizing the weighted sum rate of all the cell-edge users by jointly optimizing the BS’s transmit beamforming and IRS’s phase shifts. Especially, the beamforming is optimally obtained based on the Lagrangian method, and the phase shifts are obtained based on the Riemannian manifold conjugate gradient (RMCG) method. Numerical results show that a significant gain is improved with the aid of IRSs.
24 December 2018 in IEEE Transactions on Vehicular Technology
In this paper, we investigate an unmanned aerial vehicle (UAV)-enabled full-duplex relaying system. By assuming that the UAV follows a circular trajectory and applies decode-and-forward relaying strategy, we study the joint design of beamforming and power allocation to maximize the instantaneous data rate, under both the individual and the sum power constraints over the source and relay nodes. As the problem is non-convex, we propose an efficient sub-optimal solution based on block-coordinate descent method by decomposing the problem into two sub-problems: a beamforming optimization sub-problem with given power allocation and a power allocation sub-problem with fixed beamforming. For the beamforming design sub-problem, the optimal solution is obtained based on the semi-definite relaxation technique. For low-complexity implementation, we also propose two sub-optimal designs based on transmit zero-forcing/ maximum ratio combing and maximum ratio transmission/ receive zero-forcing. For the power allocation sub-problem, the optimal solution is obtained in closed form. Then, closed form cumulative distribution function and outage probability expressions for sub-optimal beamforming with both uniform power allocation and optimal power allocation are derived. In addition, simple and informative high signal-to-noise ratio (SNR) approximations for outage probability expressions are presented to gain insights, in terms of diversity order, average SNR and relations between outage probability and UAV position. We show that the proposed power allocation does not affect the diversity order but it increases the average SNR, and hence reduces the outage probability in the high SNR regime. The optimal flying altitude that minimizes the average outage probability can be obtained via a one-dimensional search. The fixed wing UAV based mobile relay following a circular trajectory is much more energy efficient than the rotary wing UAV based static relay hovering at a fixed location.
23 January 2019 in IEEE Wireless Communications Letters
This letter investigates the completion time and energy consumption minimization for unmanned aerial vehicles (UAVs)-enabled multicasting over a large area. We propose a fly-and-communicate protocol, where the UAV sweeps the area by a zigzag pattern and disseminates some common information to all the ground users, whose locations are unknown at the UAV. We jointly design the flying speed, UAV altitude and antenna beamwidth to minimize the completion time and energy consumption. For a given beamwidth, the completion time decreases monotonically with altitude. Furthermore, the optimal beamwidth can be obtained via a one-dimensional search with a given allowable maximum altitude. In addition, the optimal altitude and beamwidth can be obtained by alternate iteration to minimize the energy consumption.
27 July 2021 in IEEE Wireless Communications Letters
Intelligent reflecting surface (IRS) is a revolutionary technology for achieving spectral- and energy-efficient wireless networks. By adjusting the phase shifts at the IRS, a high passive beamforming gain can be achieved, which is particularly appealing for improving the spectral efficiency of wireless powered communication networks (WPCNs). Inspired by this, we study IRS-aided WPCNs, where the IRS is leveraged to help the energy transmitter (ET) broadcast the energy signals to the distributed devices in the downlink (DL), and meanwhile help the distributed devices forward the information signals to the information receiver (IR) in the uplink (UL). By taking account into the system energy consumption and achievable system throughput, we aim to maximize the energy efficiency (EE) of WPCNs by jointly optimizing phase shifts at the IRS, the beamformer at the ET, time allocation, and the transmit power of devices while guaranteeing the minimum achievable rate requirements for the devices. Since the formulated optimization problem is a nonlinear fractional programming problem, which is non-convex. To tackle this difficulty, an alternating optimization (AO) algorithm is proposed. In particular, a Dinkelbach-based algorithm is proposed to optimize the resource allocation, and a penalty-based algorithm based on the difference of convex (DC) programming and successive convex approximation (SCA) techniques is proposed to solve the phase shift optimization. Simulation results unveil that the IRS is capable of improving the system EE compared to the benchmarks.
14 February 2024 in IEEE Transactions on Vehicular Technology
This paper studies intelligent reflecting surface (IRS) assisted full-duplex (FD) hybrid wireless powered communication networks (H-WPCN) to realize both reliability and self-sustainability functionalities. We propose an efficient periodic protocol where each battery-free device can harvest energy during an entire block except its own information transmission time and design a user-adaptive IRS beamforming scheme where different IRS phase shifts are adopted for uplink wireless information transmission (WIT). Then, a weighted sum rate (WSR) maximization problem of the joint design of the hybrid access point (HAP)/devices transmit power, time allocation, and IRS phase shifts by considering the practical imperfect self-interference cancellation (SIC) and the non-linear energy harvesting (EH) model is formulated. To solve the resulting non-convex optimization problem, an efficient algorithm based on the alternating optimization is proposed. Simulation results show that the user-adaptive IRS beamforming scheme significantly outperforms the static IRS beamforming scheme and also show the benefit of IRS for alleviating the practical hardware requirements for SIC.
30 August 2023 in IEEE Access
Emerging terahertz (THz) communication will become the main way of wireless communication in the future, it will also use hybrid precoding which combines analog and digital hybrid precoding like millimeter wave communication systems, to reduce the system energy consumption. Indoor as a main scenario for communication, to better meet the demands for data transmission. In this paper, an improved hybrid precoding method based on successive interference cancelation and singular value decomposition (SIC-SVD) is proposed for indoor Sub-THz communication system with sub-connected structures. However, the introduction of phase shifters imposes constant modulus constraints, making the problem of hybrid precoding difficult to solve directly. The proposed method first decomposes the optimization problem of achievable rates for the system, based on the special structure of sub-connected, into a series of equivalent sub-problems. The algorithm first designs the analog precoding matrix according to the SIC method, after obtaining the designed analog precoding matrix, the algorithm defines an equivalent channel and employs singular value decomposition (SVD) to obtain the digital precoding matrix. The simulation results show that compared with the existing method based on SIC, the proposed algorithm has slightly higher achievable rate and is closer to the optimal full-digital precoding method. At the same time, this paper also presents a simple analysis of the proposed algorithm for imperfect channel state information (CSI) with different accuracy. Simulation results show that the spectral efficiency is also very near to the perfect CSI case when the accuracy of the CSI is 0.9.