1 July 2012 in Journal of Materials in Civil Engineering
Permanent deformation and fracture may develop simultaneously when an asphalt mixture is subjected to a compressive load. The objective of this research is to separate viscoplasticity and viscofracture from viscoelasticity so that the permanent deformation and fracture of the asphalt mixtures can be individually and accurately characterized without the influence of viscoelasticity. The undamaged properties of 16 asphalt mixtures that have two binder types, two air void contents, and two aging conditions are first obtained by conducting nondestructive creep tests and nondestructive dynamic modulus tests. Testing results are analyzed by using the linear viscoelastic theory in which the creep compliance and the relaxation modulus are modeled by the Prony model. The dynamic modulus and phase angle of the undamaged asphalt mixtures remained constant with the load cycles. The undamaged asphalt mixtures are then used to perform the destructive dynamic modulus tests in which the dynamic modulus and phase ...
1 February 2016 in Journal of Materials in Civil Engineering
The objective of this study is to demonstrate using weak form partial differential equation (PDE) method for a finite-element (FE) modeling of a new constitutive relation without the need of user subroutine programming. The viscoelastic asphalt mixtures were modeled by the weak form PDE-based FE method as the examples in the paper. A solid-like generalized Maxwell model was used to represent the deforming mechanism of a viscoelastic material, the constitutive relations of which were derived and implemented in the weak form PDE module of Comsol Multiphysics, a commercial FE program. The weak form PDE modeling of viscoelasticity was verified by comparing Comsol and Abaqus simulations, which employed the same loading configurations and material property inputs in virtual laboratory test simulations. Both produced identical results in terms of axial and radial strain responses. The weak form PDE modeling of viscoelasticity was further validated by comparing the weak form PDE predictions with real labo...
1 January 2015 in Transportation Research Record: Journal of the Transportation Research Board
The aging of asphalt pavements is a key factor that influences pavement performance. Aging can be characterized by laboratory tests and prediction models. Common aging prediction models use the change of physical or chemical properties of asphalt binders based on regression techniques or aging reaction kinetics. The objective of this study was to develop a kinetics-based aging prediction model for the mixture modulus gradient in asphalt pavements to study long-term in-service aging. The proposed model was composed of three submodels for baseline modulus, surface modulus, and aging exponent to define the change of the mixture modulus with pavement depth. The model used kinetic parameters (aging activation energy and preexponential factor) of asphalt mixtures and combined the two reaction rate periods (fast-rate and constant-rate). Laboratory-measured modulus gradients of 29 field cores at different ages were used to determine the model parameters. The laboratory testing condition was converted to the field condition at a given age and corresponding temperature by introducing the rheological activation energy to quantify the temperature dependence of field cores at each age. The end of the fast-rate period or the beginning of the constant-rate period was accurately identified to model these two periods and to determine the associated parameters separately. The results showed that the predictions matched well with the measurements and the calculated model parameters were verified. The proposed aging prediction model took into account the major factors that affect field aging speed of an asphalt pavement, such as the binder type, aggregate type, air void content, pavement depth, aging temperature, and aging time.
1 August 2016 in Journal of Materials in Civil Engineering
This paper proposes a new mechanistic-empirical rutting (MER) model to evaluate the permanent deformation (PD) behavior of unbound granular material (UGM). To characterize the stress dependence of rutting behavior in UGM, the MER model incorporated a softening stress term and a hardening stress term into the Tseng-Lytton model, which is based on the Drucker-Prager plastic yield criterion. Repeated load triaxial tests were performed on two types of UGMs in this study, employing seven stress states to calibrate the model coefficients, and two stress states to validate the accuracy of the model predictions. The correlations of the two incorporated stress terms with the accumulated permanent strains were established based on the triaxial test results. It was found that the correlations are fitted by power functions with 0.97–0.99 R2 values. The proposed MER model was compared with the existing UGM rutting models, including the MEPDG model, Korkiala-Tanttu model, and UIUC model in terms of differences ...
1 February 2013 in Journal of Materials in Civil Engineering
Fatigue cracking and permanent deformation develop simultaneously in asphalt mixtures under repeated destructive loading regardless of temperature. Because these two distinctively different damage mechanisms always occur together, it is not possible to obtain pure cracking damage or pure permanent deformation damage in any asphalt mixture by varying the temperature or loading level. This paper develops an energy-based method to separate fatigue cracking from permanent deformation in terms of energy consumption. Specifically, the dissipated pseudostrain energy (DPSE) expended on cracking is separated from that expended on permanent deformation. Controlled-strain repeated direct tension (RDT) tests are performed on asphalt mixture specimens to determine their nondestructive properties, critical nonlinear viscoelastic properties, and destructive properties. The total DPSE, which is the amount of energy dissipated for the fatigue damage, including both fatigue cracking and permanent deformation, is ca...
1 April 2013 in Journal of Materials in Civil Engineering
The use of nanoindentation to study asphalt is aimed at understanding the relationship between properties of asphalt binder at various length scales. A combination of atomic force microscopy (AFM) imaging and nanoindentation is used to determine the relaxation moduli of bimodal and trimodal distributions of asphalt microphases to assess differences between macroscale and composite nanoscale viscoelastic behavior. The relaxation modulus values extracted from age-altered phases of the same asphalts provide important relationships between microstructural changes depicted in AFM images and changes in composite viscoelastic properties obtained from the measurements. This paper provides key information regarding asphalt microrheology, which will yield improved input values for asphalt prediction models and enhanced pavement performance. Based on comparison of the composite viscoelastic properties obtained from this study to values obtained at larger length scales, it is apparent that relaxation modulus ...