The mechanisms underlying the influence of the surface chemistry of inorganic materials on polymer structures and fracture behaviours near adhesive interfaces are not fully understood. This study demonstrates the first clear and direct evidence that molecular surface segregation and cross-linking of epoxy resin are driven by intermolecular forces at the inorganic surfaces alone, which can be linked directly to adhesive failure mechanisms. We prepare adhesive interfaces between epoxy resin and silicon substrates with varying surface chemistries (OH and H terminations) with a smoothness below 1 nm, which have different adhesive strengths by ~13 %. The epoxy resins within sub-nanometre distance from the surfaces with different chemistries exhibit distinct amine-to-epoxy ratios, cross-linked network structures, and adhesion energies. The OH- and H-terminated interfaces exhibit cohesive failure and interfacial delamination, respectively. The substrate surface chemistry impacts the cross-linked structures of the epoxy resins within several nanometres of the interfaces and the adsorption structures of molecules at the interfaces, which result in different fracture behaviours and adhesive strengths.
Non-equilibrium molecular dynamics simulations were conducted for solid-liquid-solid systems with nanometer scale grooved surfaces and an induced heat flux for a wide range of topology and solid-liquid interaction conditions to investigate the mechanism of solid-liquid heat transfer, which is the first work of such extensive detail done about the nanoscale roughness effect on heat transfer properties. Single-atom molecules were used for liquid, and the solid-liquid interaction was varied from superhydrophobic to superhydrophilic, while the groove scale was varied from single atom to several nanometers, while keeping the surface area twice that of a flat surface. Both Wenzel and Cassie wetting regimes with a clear transition point were observed due to the capillary effect inside larger grooves that were more than 5 liquid molecule diameters, while such transition was not observed at smaller scales. At the hydrophobic state, large scale grooves had lower interfacial thermal conductance (ITC) due to the Cassie regime, i.e., having unfilled grooves, while at the hydrophilic state, grooved surfaces had ITC about twice that of a flat surface, indicating an extended heat transfer surface effect regardless of the groove scale. At the superhydrophilic state, crystallization of liquid at the surface occurred, and the packing of liquid molecules had a substantial effect on ITC regardless of the groove scale. Finally, both potential energy of solid-liquid interaction and work of solid-liquid adhesion were calculated and were shown to be in similar relations to ITC for all groove scales, except for the smallest single-atom scale grooves, due to a different heat transfer mechanism.
1 June 2019 in International Journal of Heat and Mass Transfer