18 April 2019 in Journal of Materials Chemistry A
Microsupercapacitors (MSCs) are alternative power sources that have the potential to fulfill the increasing demand for wearable and on-chip electronics as they are small and lightweight, and show extremely high charge–discharge rates and power densities, and have high flexibility. However, the critical challenge of recent MSCs is the limitation of low energy density and complicated fabrication processes that are high cost and time-consuming. Here, we reported an all-screen-printable method for fabricating all-solid (including electrolytes) and flexible MSCs by rationally designed composite electrodes with electrochemically exfoliated graphene (ECG) and long single-walled carbon nanotubes (CNTs). This method demonstrated to be a facile and scalable route to fabricate and assemble MSCs in a cost-effective manner and with high throughput. As a result, the resulting MSC devices exhibit an areal capacitance of 7.7 mF cm−2 and volumetric capacitance of 77.3 F cm−3, with an excellent cyclic stability of >99% after 15 000 cycles; this can be attributed to the creation of a high diffusion path and the promotion of ion transport capability. The cell exhibits energy and power densities of 10.7 mW h cm−3 and 3.17 W cm−3, respectively. Moreover, there was negligible degradation in capacitance when subjected to bending deformation with radius reduced to 0.5 mm, indicating excellent mechanical flexibility and operation stability. Further, the output voltage and current can be rationally designed by multiple connections of MSC devices in series and parallel to fulfill the demands of various applications. This study provides a scalable and cost-effective method to produce solid-state MSCs with high energy density, which paves the way for their applications in potential wearable devices.
4 October 2023 in Energy Reports
23 October 2017 in Physical Chemistry Chemical Physics
Supercapacitors constructed from three-dimensional (3D) graphene electrodes with high ion-accessible surface area and durable mechanical flexibility have great potential for wearable devices. For the development of a highly efficient graphene electrode for electrical double layer capacitors (EDLCs), proper control over not only the specific surface area but also the type of pore (macro-, meso- and micro-porous networks) adapted for an appropriate type of electrolyte is crucial to ensure an ideal performance in terms of both energy density and power delivery rate. However, there is still a lack of technology to create graphene structures that combine macro-, meso- and micro-pores by a one-step and facile method. In addition, the ion/electron transport of a solid state electrolyte among such multimodal pore structures is not fully investigated. Here, we report a novel cost-effective technique of concentration dependent self-assembly of electrochemically exfoliated graphene (EC-graphene) to obtain a 3D architecture with controllable macropores (0.39–4.99 μm) and multimodal hierarchical meso- and micro-pores. The better performance of the 3D architecture is obtained due to its optimum micron-sized macropore diameter (∼5 μm) that serves as an ion buffering reservoir, followed by facile ion diffusion kinetics through the well-modulated combination of macro-, meso- and micro-pores. The binder and conductive carbon additive free supercapacitor constructed from the 3D graphene electrode exhibited a specific capacitance of 45.40 F g−1 (6 M KOH) and 23.89 F g−1 (1 M H2SO4 gel electrolyte). A capacitance retention of above 90% (up to 180° folding angle) after 50 bending–relaxing cycles is obtained, implying the superior durability of the device and the worthiness of the synthesis procedure. The method reported here may pave the way for the development of an environment friendly, large scale producible and controlled porous graphene-based architecture for the high performance next generation flexible, all-solid-state and binder-free energy storage devices.
11 September 2019 in ACS Applied Materials & Interfaces
2 November 2023 in INDONESIAN JOURNAL OF APPLIED PHYSICS
RPRekyan Regasari M Putri
Graphene is a promising material for supercapacitors due to its unique properties, which influence the device's supercapacitor. This study aims to investigate the key factor of graphene properties in supercapacitors (, with the goal of improving their performance. Also, we observe the machine learning models for predicting capacitance of supercapacitor including four algorithms of machine learning: Linear Regression (LR), lazy IBK, Decision Table (DT), and Random Forest (RF). Machine learning model showed that the RF model demonstrated the highest correlation value of 0.745, surpassing other models. Also, the study revealed that graphene has a high specific surface area and highly porous structure, which enhanced the high capacitance values. Finally, these machine learning models are suitable to apply in materials sciences field for understanding the materials properties in supercapacitor.