ZnO-based scintillation ceramics for application in HENPA LENPA analyzers have been investigated. The following ceramic samples have been prepared: undoped ones (ZnO), an excess of zinc in stoichiometry (ZnO:Zn), doped with gallium (ZnO:Ga), and lithium (ZnO:Li). Optical transmission, x-ray excited emission, scintillation decay, and pulse height spectra were measured and analyzed. Ceramics have reasonable transparency in visible range (up to 60% for 0.4 mm thickness) and energy resolution (14.9% at 662 keV Cs137 gamma excitation). Undoped ZnO shows slow (1.6 μs) luminescence with maximum at 2.37 eV and light yield about 57% of CsI:Tl. ZnO:Ga ceramics show relatively low light yield with ultra fast decay time (1 ns). Lithium doped ceramics ZnO:Li have better decay time than undoped ZnO with fair light yield. ZnO:Li ceramics show good characteristics under alpha-particle excitation and can be applied for the neutral particle analyzers.
1 December 2005 in IEEE Transactions on Nuclear Science
Optical quality Gd 2 O 2 S:Tb,Ce ceramics have been sintered by the uniaxial hot pressing method. The heat-treated ceramics offer high transparency in a wide spectral range from 400 to 1000 nm and good scintillation characteristics: high intensity of X-ray stimulated luminescence in the green spectral region and a low level of afterglow
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
Comprehensive studies have been carried out of the interconnection of the properties of the initial powders and characteristics of optical scintillation ZnO ceramics obtained by uniaxial hot pressing. It is established how the lattice parameters, the texture, and the transparency of the ceramic samples depend on the type of powder. The x-ray luminescence intensity of the optical scintillation ZnO ceramics, with an emission wavelength peak at 517 nm, equals about 50% of that for CsI : Tl and is comparable to that of GOS : Pr, Ce ceramic, with a mean fluorescence time of 1.0–1.6 µs. The total transmittance of 1.0-mm-thick ceramic samples is about 45% at a wavelength of 517 nm.