In this research, we examined the impact of solution concentration on the photovoltaic and the material properties of perovskite solar cells (PSCs) obtained from dehydrated Pb-acetate precursors. The perovskite solution was deposited by a one-step spin-coating technique followed by 5 min of thermal annealing on a hotplate at the temperature of 90 °C to form the perovskite active layer. The PSC device structure adopted was the inverted planar architecture. The precursor solution concentrations were varied from 0.7 to 1.1M, with the optimal solution concentration found to be 1.0M. This concentration results in a power conversion efficiency of 12.2%, an open circuit voltage (Voc) of 0.94 V, a short circuit photocurrent density (Jsc) of 20.71 mA/cm2, and a fill factor of 62.69%. Our investigations revealed that the precursor solution concentration had a huge effect on the quality of the perovskite film and the photovoltaic properties of the PSCs.
1 January 1996 in Materials Science and Engineering: B
In this research, we demonstrated the use of hafnium acetylacetonate (Hfaca) dissolved in ethanol as a buffer layer for perovskite solar cells from non-halide Pb (dehydrated lead acetate) source material. The inverted p-i-n planar heterojunction structure was employed in this work. A one step spin-coating method was used in depositing the perovskite solution before thermal annealing at 90 °C for 5 min to form the perovskite film. Hfaca has been previously used as a buffer layer, but the optimal concentration has not been reported. The optimum concentration of Hfaca was found to be 1.0 mg/ml, resulting in a power conversion efficiency (PCE) of 12.23% corresponding to more than 30% improvement when compared to the control device (phenyl-C61-butyric acid methyl ester/Ag) without Hfaca, which has a PCE of 8.89%. Hfaca as a buffer layer leads to superior stability, retaining about 90% of its original PCE values after 15 days of storage in a glove box, compared to the control device, which retains 70% of the initial PCE value under the same storage.