Seokchul Lee

Seokchul Lee

Auto-generated profile, based on publicly available information

Seokchul Lee

School of Electrical and Computer Engineering, Georgia Tech, Atlanta, GA, USA

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 May 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
IJInchan Ju
Inchan Ju
SLSeokchul Lee
Seokchul Lee
JCJohn Cressler
John Cressler
An efficient, broadband SiGe HBT cascode nonuniform distributed power amplifier (NDPA) is presented for low-cost, fully integrated Si-based phased arrays. Optimum load impedances at each SiGe HBT cascode in a four-stage NDPA core are obtained by scaling the characteristic impedance ( $Z_{0}$ ) of the collector transmission lines (TLs) and tapering the SiGe HBT emitter area simultaneously. A novel compact, lumped-element two-section $\lambda $ /4 output impedance transformer (OIT) is proposed to lower the NDPA load impedance ( $Z_{L}$ ) from 50 to 25 $\Omega $ over more than one decade bandwidth (BW). Each $\lambda $ /4 impedance transformer is realized by four cascaded CLC $\pi $ -networks integrated into a single three-turn symmetric inductor in order to achieve compact size, high passive efficiency, and high LC cutoff frequency ( $f_{c}$ ). The systematic design approach of a lumped-element $\lambda $ /4 impedance transformer with an arbitrary $Z_{0}$ is described in detail. The prototype NDPA was fabricated in 0.13- $\mu \text{m}$ SiGe HBT BiCMOS technology. The proposed SiGe HBT cascode NDPA supports both high linearity (HL) and high gain (HG) modes, each suited to a specific application. The NDPA attains a peak power gain of 10.3/12.5 dB, a saturated output power ( $P_{\mathrm {out}}$ ) of 21.3/21.5 dBm, and a power added efficiency (PAE) of 12.2%/12.5%–21.6%/22.0% for HL/HG modes, with a 3-dB BW from 1.5 to 24.0 GHz. The NDPA delivers 13.0-dBm average $P_{\mathrm {out}}$ with a PAE of 10.0% at 6-Gbit/s data rate 64 QAM modulation.

15 July 2025 in IEEE Access
Verified
Journal Article
Open access
SLSeokchul Lee
Seokchul Lee
JCJohn Cressler
John Cressler
This paper presents theory-based design guidelines for four types of series-combined transformer (SCT)-based Doherty output matching networks to maximize bandwidth (BW). Intuitive, novel approaches to analyzing the series Doherty combiners are proposed. Compared to the previous analysis via only ideal or otherwise insufficient models, this article systematically derives closed-form design equations based on non-ideal transformer-based practical circuit models. With two different combinations of SCT models, and four capacitor configurations, Doherty load modulation is clearly verified for all four types. Furthermore, the design parameters are simplified, and the equations are validated, for both symmetrical and asymmetrical SCT. To anticipate maximum achievable BW and dominant design factors, four design examples of each type are compared using circuit simulation and numerical analysis. The clear trend observed for all four types is that higher magnetic coupling coefficient results in larger fractional BW. It is also demonstrated that the distinct “sweet spots” for the four types, when maximizing BW depend mainly on only 2 or 3 variables, including turn ratios and/or self-inductances. The SCT sizes are also compared by the sum of two transformer dimensions. To validate the circuit model, a design example and design procedure for best practice are provided: a layout-based full-EM structure demonstrates close-to-theoretical BW performance. For further verification, the four types of SCT-based Doherty power amplifiers are simulated and compared.