Nguyen Thi Thu Trang

Nguyen Thi Thu Trang

Auto-generated profile, based on publicly available information

Nguyen Thi Thu Trang

Vietnam Academy of Science and Technology

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2015 in Journal of Experimental Nanoscience
Verified
Journal Article
Closed access
TTTrang Nguyen Thi Thu
Trang Nguyen Thi Thu
NTNhiem Nguyen Thi
Nhiem Nguyen Thi
TQTran Hong Quang
Tran Hong Quang
KHKhanh Nguyen Hong
Khanh Nguyen Hong
TMTan Nguyen Minh
Tan Nguyen Minh
NHNam Le Thi Hoai
Nam Le Thi Hoai
Copper-doped TiO2 nanoparticles were synthesised using an ultrasonic-assisted sol–gel method with various doping concentrations from 0 to 2.5 at.%. The samples were characterised by X-ray diffraction, UV–vis diffuse reflectance spectroscopy (UV–vis), transmission electron microscopy (TEM), Brunauer–Emmett–Teller surface area determination, and zeta potential. The presence of copper in TiO2 crystal structure was revealed by UV–vis spectra, and the TEM analysis showed that particles are mainly spherical around the size range of 15–20 nm. In addition, doping copper into TiO2 lattice caused a decrease in the surface area due to the aggregation of nanoparticles and a shift of isoelectric point towards lower pH when the dopant concentration increased. The photocatalytic reactivity of these materials was evaluated by the degradation of methylene blue and methyl orange under the UV light. The effect of the initial solution pH on the adsorption capacity and the photocatalytic behaviour of the Cu-doped TiO2 in the decolourisation of these dyes were also studied.

1 December 2015 in Journal of Nanoscience and Nanotechnology
Verified
Journal Article
Closed access
NTNguyen Thi Thu Trang
Nguyen Thi Thu Trang
NCNguyen Thuy Chinh
Nguyen Thuy Chinh
DTDinh Thi Mai Thanh
Dinh Thi Mai Thanh
THTo Thi Xuan Hang
To Thi Xuan Hang
NGNguyen Vu Giang
Nguyen Vu Giang
LGLe Duc Giang
Le Duc Giang
Poly-lactic acid (PLA) has been widely applied in the medical field (in biomedicines such as medical capsules, surgical sutures and suture wounds) owing to its high biodegradability, good biocompatibility and ability to be dissolved in common solvents. Chitosan (CS) is an abundant polysaccharide and a cationic polyelectrolyte present in nature. In this study, the combination of PLA and CS has been used to form PLA/CS nanocomposites having the advantages of both the original components. To enhance the dispersibility and compatibility between PLA and CS in the PLA/CS nanocomposites, polycaprolactone (PCL) is added as a compatibilizer. The Fourier Transform Infrared spectroscopies prove the existence of the interactions of PCL with PLA and CS. A more regular dispersion of CS of 200-400 nm particle size, is observed in the PLA matrix of the PLA/CS nanocomposites containing PCL, through the Field Emission Scanning Electron Microscopy images. The appearance of one glass transition temperature (T(g)) value of PLA/CS/PCL nanocomposites occuring between the T(g) values of PLA and CS in DSC diagrams confirms the improvement in the compatibility between PLA and CS, due to the presence of PCL. The TGA result shows that PCL plays an important role in enhancing the thermal stability of PLA/CS/PCL nanocomposites. The hydrolysis of PLA/CS/PCL nanocomposites in alkaline and phosphate buffer solutions was investigated. The obtained results show that the PLA/CS/PCL nanocomposites have slower hydrolysis ability than the PLA/CS composites.

1 August 2023 in Vietnam Journal of Science and Technology
Verified
Journal Article
Open access
PDF file
NDNguyen Thanh Dong
Nguyen Thanh Dong
NTNguyen Thi Thu Trang
Nguyen Thi Thu Trang
NHNguyen Viet Hoang
Nguyen Viet Hoang
PLPham Tuan Linh
Pham Tuan Linh
PYPham Thi Yen
Pham Thi Yen
In this study, a simple, selective, and accurate analysis method was developed for the simultaneous determination of anti-inflammatory drugs (paracetamol and diclofenac) existing inlet and outlet of the wastewater treatment system. This method used solid-phase extraction (SPE) and reversed-phase high-performance liquid chromatography with a photodiode array detector (HPLC-PDA). Separation was performed using an HSR C18 column (250 mm × 4.6 mm; 5 µm) with a mobile phase consisting of acetonitrile: sodium dihydrogen orthophosphate in the ratio 60:40 v/v. The flow rate was 1 ml/min, and PDA was detected at 243 nm with paracetamol and 276 nm with diclofenac. The duration of paracetamol and diclofenac was 2.39 and 4.39 min, respectively. The developed method was validated in terms of accuracy, precision, and linearity for two drugs found in the range of 0.01 - 1 µg/ml, and 0.02 - 1 µg/ml for paracetamol, and diclofenac, respectively. The limits of detection for paracetamol and diclofenac were 0.003 µg/ml and 0.006 µg/ml, respectively, whereas the limits of quantification were 0.01 µg /ml and 0.02 µg/ml, respectively. The recoveries for paracetamol and diclofenac were greater than 95 %. The described method also has been applied to determine paracetamol and diclofenac simultaneously in the wastewater of the treatment system.

26 January 2026 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
TLThao Thanh Xuan Le
Thao Thanh Xuan Le
MNMai Thi Nguyen
Mai Thi Nguyen
LHLong Duc Huynh
Long Duc Huynh
TNTrang Thu Thi Nguyen
Trang Thu Thi Nguyen
MDManh Tuan Duong
Manh Tuan Duong
MDManh Van Do
Manh Van Do

1 September 2015 in Journal of Nanoscience and Nanotechnology
Verified
Journal Article
Closed access
LNLe Thi Hoai Nam
Le Thi Hoai Nam
TQTran Hong Quang
Tran Hong Quang
NLNguyen Thi Thanh Loan
Nguyen Thi Thanh Loan
NNNguyen Thi Nhiem
Nguyen Thi Nhiem
NTNguyen Thi Thu Trang
Nguyen Thi Thu Trang
JRJorg Radnik
Jorg Radnik
The synthesis of nano silver coated ZSM-5 zeolite (Ag/ZSM-5) by ion exchange method combined with anaerobic thermal treatment and its bacterial elimination performance were studied. The various Ag content of different samples was analysed by atomic absorption spectroscopy method. The Ag/ZSM-5 sample with 0.251 wt% Ag (denoted as ZAg3) was characterized by using atomic absorption spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and pulsed CO chemisorption methods. The results showed that silver nanoparticles with a small nanosize of 2–3 nm were formed and distributed on the surface of ZSM-5 zeolite with a dispersion value of 59%. The samples denoted as ZAg1, ZAg2, ZAg3, ZAg4 correspond to a Ag content of 0.064; 0.128; 0.251; 0.253 wt% Ag. In the evaluation series, after 10 min of contact time between bacterial and Ag/ZSM-5, over 99% of E.coli (initial concentration was 106 cfu/ml) could be eliminated by Ag/ZSM-5 with the Ag content of at least 0.251 wt% (ZAg3). In addition, over 99% of Coliform (initial concentration was 105 cfu/ml) could be eliminated by Ag/ZSM-5 with Ag content of at least 0.128 wt% (ZAg2). In a further evaluation series varying the contact time, ZAg3 sample could eliminate over 99% and 100% of E.coli after 10 min and 60 min, respectively (initial concentrations of both E.coli and Coliform were 105 cfu/ml). In addition, it could eliminate 100% of Coliform in only 10 min of contact time.

17 August 2026 in Vietnam Journal of Science and Technology
Verified
Journal Article
Open access
PDF file
NUNguyen Thi Thu Uyen
Nguyen Thi Thu Uyen
NDNguyen Thanh Dong
Nguyen Thanh Dong
PKPhan Dinh Khai
Phan Dinh Khai
NTNguyen Anh Thao
Nguyen Anh Thao
NHNguyen Viet Hoang
Nguyen Viet Hoang
NTNguyen Thi Thu Trang
Nguyen Thi Thu Trang
In this study, hybrid materials composed of TiO2 and activated carbon derived from coffee husks (TiO2-AC) demonstrated high efficiency in removing organic pollutants, including methylene blue (MB), ciprofloxacin (CIP), and trimethoprim (TRI). The activated carbon was produced from coffee production by-products after extracting phenolic compounds and was activated using ZnCl2. The TiO2-AC hybrid materials were synthesized through the solvothermal method. These materials were characterized using various techniques: Brunauer-Emmett-Teller (BET) analysis to determine specific surface area, X-ray diffraction (XRD) to analyze crystal structure, infrared spectroscopy (IR) to identify surface functional groups, transmission electron microscopy (TEM) to examine surface morphology, and zeta potential measurements to assess surface charge. The BET specific surface area of the synthesized materials was 475 m2/g for activated carbon, 88 m2/g for TiO2-AC(1:3), and 48 m2/g for pure TiO2. The adsorption and photocatalytic kinetics of MB, CIP, and TRI degradation were evaluated using the synthesized hybrid materials. The results showed that pH significantly influenced degradation efficiency: the optimal photocatalytic activity for TRI and CIP was observed at pH 7, while MB degradation was most effective at pH 9.