9 December 2022 in Environmental Earth Sciences
1 December 2023 in Journal of Performance of Constructed Facilities
16 July 2025 in Soils and Foundations
19 December 2019 in Mühendislik Bilimleri ve Tasarım Dergisi
In this study, effects of berm heights, excavation slope gradients and groundwater depths on the stability of designed excavations as well as variations on the safety factors of the excavation slopes are investigated. In the study, 3 different berm heights (5m, 10m and 15m) and 2 berms usually preferred and faced at the slope excavation applications were taken into consideration. So, for instance, for a 10 m berm height, total slope height to be analyzed will be a 30m high due to for 2 berms. In addition, depending on these 3 different berm heights (5m, 10m and 15m), 3 different slope excavation gradients (450, 550 and 650) were also defined in the modeling. Then, for these 9 different slope excavation designs, 3 different groundwater depths were also additionally attained in the analyses. Numerical seepage analyses were performed on totally 27 different modal types. Location of phreatic water seepage lines and pore water pressure values as well as safety factors of the excavation slope failure surfaces were analyzed depending on berm heights, excavation gradients and groundwater locations for 27 different excavation and slope scenarios. This study showed that when berm heights are increased, then safety of the slope excavations is decreased.
1 April 2024 in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
The most important issue regarding the safety and performance of concrete face rockfill dams (CFRDs) is to determine stresses and deformations. However, predictions of crest settlements of CFRDs are usually performed using empirical relationships. In recent years, CFRDs have been constructed much higher and at more complicated topographical and geological dam sites, so numerical analysis is required to evaluate the stress and deformations in the entire dam body. Also, assessing long-term rockfill behaviour and the concrete face membrane crack potential are important for post-construction dam safety. This study evaluates post-construction deformations and crest settlements of a high CFRD under two different loading cases, considering the non-linear elasto-plastic behaviour of the rockfill structure. As a constitutive model, the Duncan–Chang hyperbolic stress–strain model was applied in finite-element simulations considering the failure criterion is isotropic and hardening. Calibration of the rockfill's hyperbolic parameters was performed by comparing the calculated displacements with actual settlement measurements. Computed crest settlements were also compared with those of some CFRDs given in the literature. Calculated crest settlement and other deformations are in good agreement with the rockfill settlement measurements and in acceptable ranges, and do not threaten the dam's safety.
29 May 2026 in Journal of Mountain Science