10 July 2019 in IEEE Transactions on Magnetics
There is always uncertainty in industrial manufacturing. These uncertainties have an undesirable impact on the products if deterministic optimization approaches are employed. In order to have products as desired, uncertainties must be quantified in the design process. This paper presents a robust design optimization of an outer rotor surface mounted permanent magnet motor with particular application in the hybrid vehicle using the design for six-sigma methodology. Due to very long computational time of robust optimization, a ten high-dimensional surrogate model of the system using the Box-Behnken response surface methodology (RSM) is integrated with the particle swarm optimization (PSO). This causes a significant improvement in the effectiveness and efficiency of optimization. The results acquired from RSM are verified by their simulation using the finite-element method, and the accuracy of RSM is proved. Finally, the deterministic and robust optimized motors are simulated in mass production using Monte Carlo analysis, and six-sigma quality achievements are demonstrated.
26 July 2024 in IEEE Transactions on Energy Conversion
Electric machines have been in the spotlight as the transportation industry, along with many other high-impact industries, undergo the electrification process. While researchers debate whether one geometry or configuration has a higher power density, higher efficiency, or easier manufacturability, it is agreeable that nearly all the competing electric machines are symmetric. Symmetry can be used to develop a health index, whereas asymmetric signatures point to anomalies that stem from manufacturing imperfections, problems related to rotor faults, or inter-turn short circuits in the stator winding. This study takes a Switched Reluctance Motor (SRM) and an Induction Motor (IM) and analyzes their polar magnetic symmetry to introduce a stator health index. Moreover, this symmetry index in conjunction with a discriminative classifier is used to determine and classify the fault severity. Finally, this study presents a viable method to determine the health (in terms of inter-turn stator short circuit faults) of the motor and shows that support vector machine (SVM) and XGBoost can successfully classify the severity of an inter-turn short circuit fault for IM and SRM, respectively.
12 January 2026 in IEEE Transactions on Energy Conversion
One of the primary challenges in widespread use of Switched Reluctance Motor (SRM) drives is the need to monitor rotor position for proper commutation of the stator phases. Additionally, the current magnitude in each phase must be measured and accurately controlled within a specific band. The sensors required to satisfy these functions are bulky, expensive, and prone to errors. Moreover, the position sensor, which is mounted on the shaft of the machine, reduces the compactness of the overall system. Rather than relying on current sensors for control or using complex methods to estimate rotor position, this paper presents a low-cost alternative that directly senses the leakage flux of the stator windings using Hall effect sensors that are mounted axially from the end wings of the stator. Each Hall effect sensor is positioned in front of one of the concentrated end windings of the stator phases. Since the sensed magnetic leakage flux offers a one-to-one correspondence with phase current and position of the rotor, a seamless control of the SRM is possible. The proposed control method is significantly more cost-effective, compact, and robust, enabling the development of a fully integrated inverter for SRMs. Additionally, the proposed method can detect the initial rotor position without requiring any extra devices, thereby providing a reliable startup process. Simulation and experimental results are provided to validate the claims.