1 September 2017 in Aerospace Science and Technology
6 March 2020 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
The article presents the innovative unmanned aerial vehicle project for emergency medical services. Designed unmanned aerial vehicle combines vertical takeoff and landing characteristics with fast forward flight capability that are vital to perform such an emergency medical mission. The main purpose of the designed unmanned aerial vehicle is to deliver the necessary medical package to the place where access is difficult, and estimated arrival time of conventional ambulance is too long. The cost of the support of such unmanned aerial vehicle could be significantly lower than in case of medical helicopter, which is not necessary in some cases. Designed unmanned aerial vehicle can also be used for fast delivery of essential medical substances (e.g. blood). The selection of configuration was the first and crucial step of the design. After analysis of many different copter configurations, together with selected crash reports analysis, the coaxial quadcopter configuration crossed with conventional airplane was selected. All power units for VTOL capability are electric, and they are doubled for redundancy purposes, with maximum T/W ratio about 2.0. Such configuration allows to sustain a stable flight (vertical phases) in case of one motor failure. Two versions of the vehicle are designed: fully electric (power units for the forward flight and vertical takeoff and landing are electric) and mixed where forward flight unit is a small piston engine. The final layout was the result of conceptual investigation and preliminary research, MDO and trade-off analysis, where as many aspects as possible were considered. The main problem was to meet the vertical takeoff and landing capabilities, relatively long range and endurance, expected payload (3 kg) and the requirement not to exceed 25 kg of maximum take-off weight. Paper presents the design process from initial requirement to the final configuration accepted to be manufactured.
4 September 2017 in Aircraft Engineering and Aerospace Technology
Purpose: Conceptual and preliminary aircraft concepts are getting mature earlier in the design process, than ever before. To achieve that advanced level of maturity, multiple multidisciplinary analyses have to be done, often with usage of numerical optimization algorithms. This calls for right tools that can handle such a demanding task. Often the toughest part of a modern design is handling an aircraft’s computational models used for different analysis. Transferring geometry and loads from one program to another, or modifying internal structure, takes time and is not productive. Authors defined the concept of a common computational model (CCM), which couples programs from different aerospace scientific disciplines. Data exchange between the software components is compatible, and multidisciplinary analysis can be automated to high degree, including numerical optimization. Design/methodology/approach: The panel method was applied to aerodynamic analysis and was coupled with open-source FEM code within one computational process. Findings: The numerical results proved the effectiveness of developed methodology. Practical implications: Developed software can be used within the design process of a new aircraft. Originality/value: This paper presents an original approach for advanced numerical analysis, as well as for multidisciplinary optimization of an aircraft. The presented results show possible applications.
13 May 2019 in Aircraft Engineering and Aerospace Technology
Purpose: Additive manufacturing technology, also commonly called as 3D printing technology, is entering rapidly into the aerospace world and seems to be its future. Many manufacturing processes are replaced by this technology because the ease of use, low costs and new possibilities to make complicated parts. However, there are only few solutions which present manufacturing of structurally critical parts. Design/methodology/approach: Complete process of deriving loads, design of fitting geometry, numerical validation, manufacturing and strength testing was presented. The emphasis was made to show specific features of 3D technology in printed fittings for UAV. Findings: The research confirms that the technology can be used for the application of fittings manufacturing. Attention needs to be paid, during the design process, to account for specific features of the 3D printing technology, which is described in details. Practical implications: Without a doubt, additive manufacturing is useful for manufacturing complicated parts within limited time and with reduction cost. It was also shown that the manufactured parts can be used for highly loaded structures. Originality/value: The paper shows how additive manufacturing technology can be used to produce significantly loaded parts of airplanes’ structure. Only few such examples were presented till now.
3 July 2017 in Aircraft Engineering and Aerospace Technology
Purpose: The paper aims to apply numerical optimization to the aircraft design procedures applied in the airspace industry. Design/methodology/approach: It is harder than ever to achieve competitive construction. This is why numerical optimization is becoming a standard tool during the design process. Although optimization procedures are becoming more mature, yet in the industry practice, fairly simple examples of optimization are present. The more complicated is the task to solve, the harder it is to implement automated optimization procedures. This paper presents practical examples of optimization in aerospace sciences. The methodology is discussed in the article in great detail. Findings: Encountered problems related to the numerical optimization are presented. Different approaches to the solutions of the problems are shown, which have impact on the time of optimization computations and quality of the obtained optimum. Achieved results are discussed in detail with relation to the used settings. Practical implications: Investigated different aspects of handling optimization problems, improving quality of the obtained optimum or speeding-up optimization by parallel computations can be directly applied in the industry optimization practice. Lessons learned from multidisciplinary optimization can bring industry products to higher level of performance and quality, i.e. more advanced, competitive and efficient aircraft design procedures, which could be applied in the industry practice. This can lead to the new approach of aircraft design process. Originality/value: Introduction of numerical optimization methods in aircraft design process. Showing how to solve numerical optimization problems related to advanced cases of conceptual and preliminary aircraft design.