9 May 2024 in Measurement Science and Technology
The error characteristics of a typical commercial MEMS-IMU were analyzed. Using 15 ICM-42688 sensors, a 3*5 MEMS-IMU array was designed, and a weighted data fusion method based on Allan variance for the MEMS-IMU array was proposed. This effectively reduces the random measurement errors of the MEMS-IMU, providing a data foundation for the precise measurement of motion and attitude of robots, vehicles, aircraft, and other systems under low-cost conditions. The text describes a measurement method for non-stationary motion attitudes of sports vehicles based on adaptive Kalman-Mahony. Specifically, it first uses adaptive Kalman filter on array sensor data to calculate the measurement noise in real-time and adaptively adjust the filtering gain. Then, it determines the compensation coefficient of the accelerometer to the gyroscope angular velocity based on the motion state of the vehicle, and solves the attitude through complementary filtering to obtain the motion attitude quaternion. Finally, it converts it into the roll angle, pitch angle, and yaw angle of the sports vehicle. Experimental results show that the proposed MEMS-IMU array weighted data fusion method based on Allan variance has significant advantages over traditional single MEMS-IUM methods and traditional average weighting methods in reducing sensor angle random walk and zero drift instability. The proposed adaptive Kalman-Mahony attitude measurement method also shows a significant improvement in the accuracy of non-stationary motion attitude measurement compared to traditional methods.
26 March 2025 in IEEE Transactions on Instrumentation and Measurement
High quality sleep is a fundamental guarantee for human physical health. Sleep monitoring is crucial for understanding sleep quality and structure, but traditional sleep monitoring methods often require specialized lab environments and uncomfortable sensors. This paper proposes a non-contact sleep monitoring method based on millimeter wave radar, which accurately measures breathing and heartbeat rates during sleep by preprocessing reflected signals and using Variational Mode Extraction (VME) algorithm, and simultaneously detects snoring events. In order to improve the accuracy of snoring detection, a sliding window algorithm based on data density and amplitude is introduced, effectively filtering out low-amplitude noise and accurately identifying snoring segments. Experimental results show that this method can detect snoring events with an average error of 0.10 seconds, and the accuracy of breathing rate and heart rate detection is approximately 0.72 bpm and 2.56 bpm, respectively. This method demonstrates high real-time performance and reliability, and is expected to find broad applications in the diagnosis of clinical sleep disorders and home health monitoring.
1 May 2025 in Review of Scientific Instruments
A circuit array of 16 micro-electro-mechanical system inertial measurement unit (IMUs) is developed, and an improved multi-IMU data fusion method based on the strong tracking Sage–Husa adaptive Kalman filter (ST-SHAKF) is proposed to achieve high-precision inertial measurement at low cost. The traditional Sage–Husa adaptive (SHAKF) algorithm is simplified for adaptive parameterization, with improved measurement noise variance estimation to ensure positive-definiteness. Filter divergence is addressed by supplementing the SHAKF with a strong tracking filter to maintain convergence. Dynamic weight allocation via minimum variance estimation enables effective multi-IMU data fusion. Experiments show that the proposed method significantly outperforms the traditional Sage–Husa adaptive Kalman filter in terms of Allan variance and standard deviation. Compared to traditional SHAKF, the proposed method achieves better noise suppression and improved fusion accuracy for both acceleration and angular velocity under both static and dynamic conditions.