1 June 2010 in Ultrasonics Sonochemistry
The cavitation field generated by an ultrasonic horn at low frequency and high power is known to self-organize into a conical bubble structure. The physical mechanism at the origin of this bubble structure is investigated using numerical simulations and acoustic pressure measurements. The thin bubbly layer lying at horn surface is shown to act as a nonlinear thickness resonator that amplifies acoustic pressure and distorts acoustic waveform. This mechanism explains the self-stabilization of the conical bubble structure as well as the generation of shock wave and the focusing at very short distance.
1 May 2002 in Ultrasonics
1 January 1999 in Revue Européenne des Éléments Finis
Numerical models used to describe the electromechanical coupling due to piezoelectric or electrostrictive effects are analysed. In the first section, the thermodynamic basis provides constitutive equations of piezoelectricity and electrostriction in a similar form. The principle of virtual works leads to a unique variational formulation of both effects. This formulation is derived for static and dynamic problems in the second section. The finite element discretization and the application of the variational principle provide linear or nonlinear coupled set of equations. In the third section, two applications are presented: an ultrasonic notor made of PZT ceramics for piezoelectricity, a PMN-PT bar for electrostriction.
1 May 1998 in The Journal of the Acoustical Society of America
1 May 1997 in The Journal of the Acoustical Society of America
JCJocelyne F. Coutte-Dubois
Jocelyne F. Coutte-Dubois
1 November 2007 in The Journal of the Acoustical Society of America
Piezoelectric transducers are considered as potential sources for geophysical applications such as 4D monitoring or shallow subsurface survey, which require high repeatability and precise control of the emitted signal. However, the use of piezoelectricsources is limited by their low power and narrow bandwidth. Flextensional transducers are compact, high power, low frequency, wide‐band projectors used in underwater acoustics. The design, fabrication and test of a flextensional transducer for high resolution seismic imaging are presented in this paper. Circuit modeling is used to discuss the general properties of piezoelectricsources radiating in the ground. Finite element simulations (ATILA code) are conducted to design a wide band 500–1500 Hz flextensional transducer. On‐site tests are performed for a typical configuration of shallow subsurface survey. The prototype transducer is compared to a weight drop which constitutes a well‐known seismic source. By taking advantage of the source repeatability and using specific signal processing, it is found that the flextensional transducer is equivalent to weight drop ranging from 300 to 1300 J. Bandwidth is increased by 200 to 300%, leading to a significant improvement of image resolution.