1 March 2017 in Mechanical Systems and Signal Processing
9 July 2015 in MATEC Web of Conferences
As consumables in mine, wire ropes have great significance for safe operation of coal mines. The complex structure makes the nondestructive testing particularly difficult. This paper summarizes the existing methods of analysis at home and abroad from the perspective of strong magnetic and weakly magnetic; introduces the main methods of wire rope at the present, including principle and current status. At last, several critical problems in nondestructive testing of wire rope are discussed.
1 March 2017 in Insight - Non-Destructive Testing and Condition Monitoring
In view of the limitations in the currently applied defect detection techniques for the large-diameter hoisting wire ropes used in coal mines, this study proposes a new method for detecting magnetic excitation in wire ropes by combining the structural models for dynamic magnetic field balancing and magnetic focusing. The paper first describes a structural model that applies the principle of magnetic field balancing to integrate sensors for defect detection in wire ropes. Next, it presents the design of a structural model for magnetic focusing, which is applicable to large-diameter wire ropes and can achieve all-round detection without exception. A detection method that uses a Hall-element array in combination with the magnetic focusing technique, which can reduce the interference produced by the interactions between the environmental magnetic fields and the wire rope strand, is also proposed. Finally, the proposed detection sensor is tested through simulations and experiments. As the proposed sensor is equipped with a permanent magnet made of N35-type material, which has a smaller remanence and is 20 mm less wide and 20 mm less thick than conventional magnetic flux leakage defect detection sensors, the volume, weight and cost of the sensor is lower. Moreover, in comparison, the proposed sensor detected six defects accurately in the experiment, while the conventional sensor missed one. The signal-to-noise ratio of the proposed sensor is 6.5 dB higher than that of the conventional one, which reveals that it provides better detection capabilities.
1 September 2011 in Advanced Materials Research
Deviated belt will cause great harm, which will not only reduce its service life, but also will lead to the machine damage and personal casualty. This paper analyzes the reasons for belt deviation and establishes the mechanical model of a conveyor belt. The theoretical analysis and numerical simulation are adopted in this article to analyze and research the speed when the belt is deviated, obtain the relation between the transversal movement speed of belt and front offset angle of a idler, idler rotation speed and belt speed, and provide the deviation correction and prevention of belt conveyor with theoretical guidance.
3 November 2015 in International Journal of Mining Science and Technology
In this paper, we propose a pre-processing method for the detection of wire-rope signals. This is necessary because of the lack of processing methods that are currently employed. First, we investigated the one-dimensional discrete morphological and wavelet transform. Then, we developed a pre-processing model that is based on the morphological wavelet-filtering algorithm. We then proposed a modified morphology filtering algorithm. We also designed an experiment platform for wire-rope detection. Eight levels of localized flaws (LFs) and damage were formed in the wire-rope specimen. We performed a series of experimental studies, and the results show that the proposed method can effectively filter the drift signal. The signal-to-noise ratio of the new filtering algorithm was over 26 dB. The signal-to-noise ratio of the existing method is less than 15 dB, and the noise-signal ratio of the new filtering algorithm has improved by 73%. Based on our results, the filtering effect of the proposed method is better than that of the present method. This study has great significance and practical value in engineering applications.