23 June 2012 in Space Science Reviews
A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5∘ to 50∘ 2θ with 13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar® or Kapton® windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.
10 October 1994 in Applied Physics Letters
We have grown a very high finesse microcavity using distributed Bragg reflectors of AlxGa1−xAs and AlAs. The measured Fabry–Pérot mode has a linewidth of 0.84 Å at 930 nm. This implies a finesse in excess of 5500 and an effective (mirror corrected) finesse greater than 1450. Comparison with theoretical calculations for such a structure shows that (i) the growth rates are stable to 0.25% over 14 h and (ii) the internal losses are less than 1 cm−1.
17 September 2007 in Physical Review B
The displacement field in highly nonuniformly strained crystals is obtained by addition of constraints to an iterative phase retrieval algorithm. These constraints include direct space density uniformity and also constraints to the sign and derivatives of the different components of the displacement field. This algorithm is applied to an experimental reciprocal space map measured using high-resolution x-ray diffraction from an array of silicon lines, and the obtained component of the displacement field is in very good agreement with the one calculated using a finite element model.
30 July 2004 in Physical Review E
Through the combination of three different, complementary techniques (optical microscopy, x-ray diffraction and atomic force microscopy), we reveal the deformations inside thin smectic films frustrated between two interfaces imposing antagonistic anchorings. We study the model system, 4--octyl--cyanobiphenyl (8CB) between and air, which is characterized by the competition between homeotropic anchoring at air and planar unidirectional anchoring on the substrate, with thicknesses varying around . Optical microscopy and x-ray diffraction demonstrate the continuous topology of smectic layers between the interfaces, which are stacked into periodic flattened hemicylinders. These latter are one-dimensional (1D) focal conic domains which form an optical grating in the smectic film, of a period ranging from 1 to . The interpretation of our results through an energetic model, associated with the atomic force microscopy (AFM) measurements, shows the presence below a critical thickness of a new type of curvature wall between neighboring hemicylinders.
10 July 1995 in Applied Physics Letters
We have produced epitaxial Si1−x−yGexCy/Si heterostructures by rapid thermal chemical vapor deposition using methylsilane SiCH6). These layers were grown in the SiH4/GeH4/SiCH6/H2 system between 550 and 600 °C at 1.5 Torr. Suitable process conditions were found that allow very efficient substitutional carbon incorporation. No carbon cross contamination was observed. Crystal quality, chemical composition, and lattice strain were deduced from Nomarski microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, secondary ion mass spectrometry, and x‐ray diffraction. Defect‐free alloy layers with compositions of up to 20 at.% Ge and 2.2 at. % C were produced. The lattice parameter was tailored so that the strain in these layers gradually moved from compressive to tensile. A tensile strain of up to 0.35% was achieved.
31 August 2015 in ACS Nano