In Surface-Enhanced Raman Scattering (SERS) analysis, enhancing the Raman signal is crucial and is primarily governed by two mechanisms: electromagnetic mechanism (EM) and chemical mechanism (CM). While the EM is well understood, gaining insight into the CM and its synergy with EM is crucial for optimizing SERS performance. In this study, CM effects were investigated through molecular adsorption and charge transfer (CT) processes using SERS substrates composed of silver nanoparticles (AgNPs) integrated with aluminium-doped zinc oxide (AZO) semiconductor thin films. AgNPs were synthesized via microwave irradiation and centrifugation, followed by incubation with Rhodamine 6G (R6G) and Methylparaben (MP) to enhance analyte adsorption. Adsorption behaviours were analysed using the Langmuir and Freundlich isotherm models. The analyte-loaded AgNPs were then combined with AZO thin films prepared by sputtering. These hybrid substrates not only generated electromagnetic “hot spots” to boost Raman signals via the EM but also facilitated CT, thereby enhancing signals through CM. A proposed CT mechanism between the substrate and analytes is also presented. The results demonstrate that the Ag/AZO SERS substrates exhibit a strong synergistic EM–CM effect, enabling the sensitive detection of R6G and MP at low concentrations, achieving enhancement factors (EFs) of 8.67 × 1010 (at 10−13 M) and 1.45 × 106 (at 0.001 ppm or 6.58 × 10−9 M), respectively.
This study investigates the structural, electrical, and optical properties of NiO thin films deposited by DC sputtering in an Ar/O2 atmosphere with varying oxygen concentrations.
1 June 2003 in Journal of Magnetism and Magnetic Materials
In recent years, surface-enhanced Raman scattering (SERS) based on metal oxide semiconductors has been an active area of research and development, attracting significant scientific interest. These SERS substrates are known as plasmon-free SERS substrates because they are not based on noble metal nanoparticles but mainly on the defects, structure, and surface morphology of semiconductors to enhance the Raman signal. In this study, we fabricated a SERS substrate based on molybdenum oxide, using reactive DC magnetron sputtering and then used different simple and effective strategies to enhance the Raman signal. The results show that nanorod structure, oxygen deficiency engineering, phase engineering, and optical properties can be easily controlled by varying sputtering time and annealing time of MoOx SERS substrates. The analysis methods XRD, PL, and Raman show that with the optimal fabricated conditions. The presence of oxygen defects and a mixed MoO3, Mo9O26 phase structure in as well as the nanorod structure of MoOx SERS substrates could likely enhance Raman signals via a chemical mechanism (CM) and electromagnetic mechanism (EM). The MoOx SERS substrates were also used to detect R6G at low concentrations, with an EF of 1.14 × 106 (at 0.01 ppm), LOD of 0.01 ppm, and good temporal stability and reproducibility.