1 May 2019 in Journal of Vacuum Science & Technology A
The resistivity size effect in nanoscale metals is of both scientific and technological interest, the latter due to its importance to interconnects between transistors in integrated circuits. In this work, the authors report the variation of resistivity with film thickness and with changes in surface scattering of ex situ annealed single crystal Ru thin films grown on sapphire substrates by sputter deposition. The room temperature deposition of SiO2 on the Ru sample surface was observed to increase the resistivity of films that had previously been subjected to annealing in a reducing gas ambient. These overcoated samples were also found to increase in resistivity as a result of an oxidizing anneal and reduce in resistivity as a result of a subsequent reducing gas (Ar + H2) anneal. To a large extent, the surface structure and electron scattering characteristics were found to be reversible between oxidizing and reducing gas anneals. The chemistry and structure of the Ru upper surface was characterized by low energy electron diffraction (prior to the SiO2 overcoat deposition), x-ray reflectivity, x-ray photoelectron spectroscopy, and resistivity measurements. The changes in surface structure and chemistry were related to the changes in the specularity of the Ru surface for electron scattering in the context of the Fuchs–Sondheimer semiclassical model of the resistivity size effect, and in this context a mostly specular metal/dielectric interface is reported.
13 April 2020 in Journal of Vacuum Science & Technology A
Experimentally measured resistivity of Co(0001) and Ru(0001) single crystal thin films, grown on c-plane sapphire substrates, as a function of thickness is modeled using the semiclassical model of Fuchs–Sondheimer. The model fits show that the resistivity of Ru would cross below that for Co at a thickness of approximately 20 nm. For Ru films with thicknesses above 20 nm, transmission electron microscopy evidences threading and misfit dislocations, stacking faults, and deformation twins. Exposure of Co films to ambient air and the deposition of oxide layers of SiO2, MgO, Al2O3, and Cr2O3 on Ru degrade the surface specularity of the metallic layer. However, for the Ru films, annealing in a reducing ambient restores the surface specularity. Epitaxial electrochemical deposition of Co on epitaxially deposited Ru layers is used as an example to demonstrate the feasibility of generating epitaxial interconnects for back-end-of-line structures. An electron transport model based on a tight-binding approach is described, with Ru interconnects used as an example. The model allows conductivity to be computed for structures comprising large ensembles of atoms (105–106), scales linearly with system size, and can also incorporate defects.
17 June 2008 in Journal of Vacuum Science & Technology A
A methodology is developed to independently evaluate surface and grain boundary scattering in silicon dioxide-encapsulated, polycrystalline Cu thin films. The room-temperature film resistivity for samples with film thicknesses in the range of 27 to 1 65 nm and different grain sizes (determined from approximately 400 to 1500 grains per sample) is compared to existing and empirical models of surface and grain boundary scattering. For the combined effects of surface and grain boundary scattering, the surface specularity parameter p is 0.6±0.2 and the grain boundary reflectivity coefficient R is 0.45±0.03. It is thereby shown that the resistivity contribution from grain boundary scattering is significantly greater than that of surface scattering for Cu thin films having Cu∕SiO2 surfaces and grain sizes similar to film thickness.
24 April 2017 in Journal of Materials Science
1 January 2006 in Journal of the Electrochemical Society
A series of carbon-containing cathode materials <mml:math display="inline"><mml:msub><mml:mi mathvariant="normal">LiMn</mml:mi><mml:mrow><mml:mi>y</mml:mi></mml:mrow></mml:msub><mml:msub><mml:mi mathvariant="normal">Fe</mml:mi><mml:mrow><mml:mn>1</mml:mn><mml:mo>−</mml:mo><mml:mi>y</mml:mi></mml:mrow></mml:msub><mml:msub><mml:mo>PO</mml:mo><mml:mrow><mml:mn>4</mml:mn></mml:mrow></mml:msub></mml:math>LiMnyFe1−yPO4 <mml:math display="inline"><mml:mo stretchy="false">(</mml:mo><mml:mn>0</mml:mn><mml:mo><</mml:mo><mml:mi>y</mml:mi><mml:mo>⩽</mml:mo><mml:mn>1</mml:mn><mml:mo stretchy="false">)</mml:mo></mml:math>(0<y⩽1) were prepared using a solid-state reaction by adding carbon black to the synthetic precursors. The local structural change of electrochemically prepared <mml:math display="inline"><mml:msub><mml:mi mathvariant="normal">Li</mml:mi><mml:mrow><mml:mi>x</mml:mi></mml:mrow></mml:msub><mml:msub><mml:mi mathvariant="normal">Mn</mml:mi><mml:mrow><mml:mi>y</mml:mi></mml:mrow></mml:msub><mml:msub><mml:mi mathvariant="normal">Fe</mml:mi><mml:mrow><mml:mn>1</mml:mn><mml:mo>−</mml:mo><mml:mi>y</mml:mi></mml:mrow></mml:msub><mml:msub><mml:mo>PO</mml:mo><mml:mrow><mml:mn>4</mml:mn></mml:mrow></mml:msub></mml:math>LixMnyFe1−yPO4 <mml:math display="inline"><mml:mo stretchy="false">(</mml:mo><mml:mn>0</mml:mn><mml:mo>⩽</mml:mo><mml:mi>x</mml:mi><mml:mo>⩽</mml:mo><mml:mn>1</mml:mn><mml:mo>,</mml:mo><mml:mn>0</mml:mn><mml:mo><</mml:mo><mml:mi>y</mml:mi><mml:mo>⩽</mml:mo><mml:mn>1</mml:mn><mml:mo stretchy="false">)</mml:mo></mml:math>(0⩽x⩽1,0<y⩽1) samples has been investigated by X-ray absorption spectroscopy. The results showed that the local structural change of manganese is completely reversible during the charge-discharge processes. According to the analysis of K-edge X-ray absorption fine structure, no significant difference is observed in the local structure of manganese in the charged state over the entire manganese content range. © 2002 The Electrochemical Society. All rights reserved.
8 December 2008 in Applied Physics Letters
The dynamics of excitation in low-temperature-annealed Si-rich are studied. It is demonstrated that Si-excess-related indirect excitation is fast (transfer time ) and occurs into higher lying levels as well as directly into the first excited state . By monitoring the time-dependent emission at 1535 nm, the multilevel nature of the sensitization is shown to result in two types of excitation of the state: a fast excitation process directly into the level and a slow excitation process due to fast excitation into levels above the level, followed by internal relaxation with a time constant . The fast and slow excitations of the level account for an approximately equal fraction of the excitation events: 45%–50% and 50%–55%, respectively.