1 November 2023 in Physics of Fluids
The state-of-the-art high-fidelity state-to-state (StS) model is performed to investigate the hypersonic shock wave/laminar boundary layer interaction over a 25°–55° double cone. This work aims to clarify whether the shortcomings of thermochemical models are the underlying source for the discrepancies between the simulations and experiments. A high-enthalpy nitrogen flow with a Mach number of 11.54 and a unit Reynolds number of 4.394×105/m is considered. We first find that the StS and widely used two-temperature models yield two different shock reflection patterns (i.e., the regular reflection and Mach reflection, respectively). However, the surface pressure and heat flux distributions predicted by the two models are generally consistent, which are not influenced by the differences in the shock patterns, dissociation rates, and non-Boltzmann vibrational distributions in the flowfields. Moreover, the StS model fails to match the experiments in spite of fairly limited improvement. Our findings indicate that the shortcomings of thermochemical models are not the main reason for the discrepancies in the simulations and experiments for the high-enthalpy nitrogen double-cone flow.
1 January 2024 in Physics of Fluids
The hypersonic high enthalpy nitrogen flows over spheres are investigated by high-fidelity state-to-state (StS) modeling. The objective of the study is to understand the nonequilibrium behaviors in the shock layer, including the stagnation line features, surface heat transfer rate, and near-wall properties inside the thermal boundary layer. Two cases with the freestream total enthalpies of 16.5 and 15.5 MJ/kg are considered, and the numerical results are compared with the experimental data. The StS model yields an accurate prediction of the shock stand-off distance with the experiment rather than an underestimation by the traditional two-temperature model. Both the StS and two-temperature models provide general agreement of the stagnation point heat flux with the experiment. In comparison, the heat flux obtained by the StS model is lower than the two-temperature model. Note that our work finds distinctive behaviors of near-wall properties. The vibrational energy is not accommodated with the sphere surface and is in thermal nonequilibrium with the translational energy, with evidence showing that the vibrational temperature is much higher than the wall temperature and the translational temperature. The values of vibrational temperature in the immediate vicinity of the stagnation point are 9.3 and 10.0 times the wall temperature for the cases with total enthalpies of 16.5 and 15.5 MJ/kg, respectively. Moreover, the vibration temperature demonstrates a nonmonotonic variation trend with a local minimum, which can be explained by the nonequilibrium distributions of vibrational energy states due to vibrational-translational energy transfer and molecular recombination.
1 October 2023 in Physics of Fluids
Hypersonic near-continuum flow over a flat plate with micro-scale roughness is studied using the kinetic direct simulation Monte Carlo method on roughness module configurations with different relative roughness (h) values and roughness densities (RN) under a matrix of freestream parameters (Mach number Ma∞, Reynolds number Re∞, temperature T∞, and Knudsen number Kn∞). An open-source Stochastic PArallel Rarefied-gas Time-accurate Analyzer code, which enables Cartesian grid adaption and efficient parallelization, is utilized for the rough-plate flow simulations. Flowfield analysis reveals that the local patterns inside the roughness modules evolve starting from closed (two vortices) via transitional ultimately to open (one vortex) by an increase in h, with co-existing shrinkage of high-density zones and attenuation of density peaks. The surface quantities are significantly influenced by the flowfield characteristics, and a local association between the peak heat flux and the peak pressure is identified. Non-dimensional peak heating and pressure correlation laws for the local peak heat flux and pressure coefficients in terms of two length-scale transformations are proposed, enabling the capture of local heating and pressure extrema on rough plates with varying h and RN conditions under different Ma∞, Re∞, and T∞ parameter values. The peak heat flux and pressure coefficients can be described by analogous correlating equations expressed by first-order-polynomial or power functions. An increase in the rarefaction degree (Kn∞) deviating from the near-continuum regime causes the correlation laws to fail.
1 February 2025 in Physics of Fluids
Large-scale pulsation unsteadiness is identified in the high-enthalpy shock wave-boundary-layer interaction flow over a double wedge. The objective of the study is to illustrate the transient flowfield evolution and spatiotemporal dynamics of the pulsation mode with vibrational nonequilibrium. A laminar nitrogen flow with a freestream Mach 4.11 and a total enthalpy of 3.77 MJ/kg for a 30°–55° double wedge is considered, which is a test case from the experiments in the Hypervelocity Expansion Tube. Unsteady two-dimensional Navier–Stokes equations incorporating thermochemical nonequilibrium gas model are numerically solved with a due-time stepping time marching scheme to the second-order accuracy. The simulated shock structure agrees well with the experimental Schlieren snapshots in the flow establishment course. Periodic inflation and restoration of the shock system are driven by the expansion of separation bubbles and escape of low-pressure vortices. A single main frequency is identified over the flowfield for the pressure and temperatures, indicating that the motions of the separated region, shock system, and shear layer are strongly coupled to form a synchronized pulsation mode. Finally, the variation in the non-dimensional frequency for high-enthalpy pulsation flow is illustrated based on the binary scaling law.