: Dehydrated garlic is an importance spice in pre-cooked and processed food products, but studies of the drying variables of this product are scarce. Thus, this work aimed to model and study the kinetics of garlic drying at three different temperatures (40, 50 and 60 °C) and analyze the thermodynamic parameters during the process. The drying was analyzed using pre-established mathematical models for agricultural products and equations that describe the thermodynamics of product dehydration. The best mathematical adjustment for all drying temperatures was the Midilli equation. The moisture ratio was seen to decrease during the process for all situations. The effective diffusivity increased with increasing temperature. The enthalpy change was positive during the process and decreased with increasing temperature. The study entropy was negative, indicating a non-spontaneous reaction. In addition, the Gibbs free energy increased with increasing drying temperature. The thermodynamic standards were satisfactory and correctly described the moisture loss by the garlic samples.
1 June 2018 in Revista Brasileira de Engenharia Agrícola E Ambiental
The objective of this work was to perform foam-mat drying of yellow mombin pulp, verifying the kinetics and mathematical modeling of the process, and characterizing the obtained product with respect to physical and chemical characteristics, compared with the fresh pulp. Foam-mat drying was carried out with the aid of the foam agent Emustab®, at temperatures of 50, 60, 70 and 80 °C. The drying data were analyzed and fitted to four mathematical models (Wang & Singh, Verma, Page and Midilli). Effective diffusion coefficient and activation energy were determined. Titratable acidity, pH, soluble solids content and vitamin C content, as well as the solubility in water of yellow mombin powder and color variance (L*, a*, b*) were analyzed in both fresh and dehydrated pulp. The Wang & Singh model showed best fit at the temperature of 50 °C, whereas the Midilli model showed the best mathematical fit at temperatures of 60, 70 and 80 °C. Net diffusion coefficient and activation energy values were proportional to the drying temperature. Drying of the foam at 60 °C indicated guarantee of quality of yellow mombin pulp with respect to titratable acidity, pH and color of the a* coordinate.
Cerrado cashew (Anacardium othonianum Rizz) pomace is the main by-product from the processing of cashew apples. This study aimed to (i) investigate the difference between the chemical compositions of the pomaces of yellow (YCP), orange (OCP), and red (RCP) cashew apples based on their mineral, monosaccharide, and polyphenolic compositions; and (ii) optimize enzyme-assisted extraction of the phenolic compounds from Cerrado cashew apple pomace. Potassium and iron were the main macro- and microelements found in residue, and significant differences were noted in the profiles of the samples. The predominant monosaccharides in the samples included glucose (52.7–60.6 mol%) and uronic acid (12.5–14.5% mol). The complete three-level factorial design allowed the optimization of pH, extraction time, and temperature, leading to an optimal extraction of polyphenols at pH 5.5, an extraction time of 120 min, and a temperature of 55°C. Myricetin (43.03–44.26 mg/kg), vanillic acid (30.96–32.32 mg/kg), and gallic acid (11.34–29.25 mg/kg) were the major polyphenols found in the samples. These results confirmed that regardless of the color of Cerrado cashew apple pomace, this by-product is a potential source of phytochemicals for application in sustainable and functional food products.
Nanocomposite coatings functionalized with antimicrobial nanoparticles could be a promising alternative for the postharvest preservation of fruits. This study aimed to develop nanocomposite coatings based on pectin incorporated with zinc oxide (NPZ) nanoparticles to preserve the postharvest quality of papaya fruits. The coatings were prepared using pectin (3%) and NPZ (0%–0.4%). The materials were characterized for water-related properties (water solubility and water vapor permeability) as well as physical, mechanical, morphological, rheological, and structural properties. The coatings were applied to papaya fruits, which were analyzed for weight loss, firmness, titratable acidity, and soluble solids over nine days of storage. Incorporating NPZ (0%–0.4%) did not affect the films’ water solubility and vapor permeability. However, films with NPZ exhibited lower mechanical properties than pure pectin films. Rheological behavior testing indicated that the pectin solution was a Newtonian fluid, whereas pectin solutions with zinc nanoparticles were non-Newtonian fluids. The pectin coating with 0.2% NPZ was the most effective in preserving the postharvest quality of papaya by reducing fruit weight loss and acidity content. Therefore, the developed coatings incorporated with NPZ showed promise for the postharvest preservation of papaya fruits.
1 June 2018 in Revista Brasileira de Engenharia Agrícola E Ambiental
Yellow mombin has high nutritional value but is very perishable. Foam mat drying is a method that has been widely used to preserve liquid and semi-solid powdered foods. In this context, the aim of this study was to determine desorption isotherms and isosteric heat of yellow mombin (Spondias mombin L.) foam for different conditions of temperature and water activity. Powdered yellow mombin pulp was obtained by drying in forced-air oven regulated to 60 ° C. The indirect static method was used to determine the isotherms and isosteric heat, whereas water activity (aw) was determined using the Hygropalm-HP23AW-A analyzer. A B.O.D. incubator, set at 10, 20, 30 and 40 °C, was used to control the temperature, and the water activity for each temperature was between 0.220 and 0.832. The experimental data were fitted to mathematical models frequently used to represent the hygroscopicity of agricultural products, and the best model was the Modified Halsey. Integral isosteric heat of desorption of yellow mombin powder, within the water content range of 17.22 to 57.58 (% d.b.), ranged from 3198.56 to 2598.38 kJ kg-1. It was concluded that the equilibrium water content of yellow mombin pulp powder increased with the increment in water activity; desorption isotherms obtained for yellow mombin pulp powder showed sigmoid form and, with the reduction of water content, the isosteric heat increases.
12 April 2020 in Research, Society and Development
The cajá fruit stands out for its peculiar flavor, but little is known about its physical, physical-chemical and nutritional characteristics. The knowledge of fruit and seed biometrics, physicochemical and nutritional composition provides information for the conservation and exploitation of resources of economic value, and can be exploited by genetic improvement programs to obtain cultivars that provide fruits with important characteristics for commercialization. Thus, it aimed to evaluate the characteristics we sought to evaluate these characteristics considering samples from different trees / regions of the municipality of Montes Claros of Goiás. The cajá fruit biometry (density, volume, mass, fruit and seed size and pulp yield) was measured. Titratable acidity, soluble solids content, pH, vitamin C content and mineral content were also measured. Total phenolic compounds and antioxidant activity were evaluated by the Folin-Ciocalteau, ORAC and ABTS methods, respectively. With the results obtained, it was possible to infer that the fruits harvested in different trees of different places differed statistically. The fruits of Region 2 had the highest fruit and seed length and diameter, as well as the highest pulp thickness, macro and micronutrient content and total phenolic compounds content, compared to fruit from other areas probably influenced by type of soil. The knowledge of the characteristics of the fruits from different trees / regions is necessary because the industrialization needs parameters for standardization in the formulation of different foods.