29 August 2025 in Applied Surface Science
2 March 2022 in CrystEngComm
A pure Cu2ZnSnSe4 phase was prepared from elemental Cu, Zn, Sn, and Se with the addition of a KI–KCl mixture.
1 February 2016 in Key Engineering Materials
In this work, Ga2S3 crystals were obtained by vertical Bridgman method. The presence of cracks in the grown crystals was interpreted as a result of phase transition into monoclinic structure during cooling. This suggests the use of another approach for the growth of high quality samples, e.g. chemical transport method or melt-solution method. Maximal transparency range of 0.48-22.5 μm and at least 10 times higher damage threshold to that for GaSe render anisotropic Ga2S3 crystal among the most prospective crystals for nonlinear applications.
30 October 2023 in Chemical Bulletin of Kazakh National University
The kinetics of photocatalytic decomposition of dye (Orange II) in the presence of titanium (IV) dioxide was studied. A presented kinetic model takes into account the active forms of particles involved in the process of photocatalytic oxidation. By adding various scavengers, it was found that superoxide radicals (O2•-) play the most significant role in dye photodegradation. Tert-butanol (t-BuOH), ammonium oxalate (OA), sodium azide (NaN3), 4-hydroxy-TEMPO (TEMPOL) and dimethyl sulfoxide (DMSO) were used as scavengers with a final concentration of 10 mM of hydroxide radicals (•OH), holes (h+), singlet oxygen (1O2), superoxide radicals (O2•-) and electrons (e-) in 40 ml of Orange II solution. The proposed kinetic model includes the following stages: photogeneration of particles, formation of superoxide radicals and their interaction with organic dye, products and inactive surfaces. Studies were conducted to determine the kinetic parameters of the reaction, particularly the order of Orange II photodegradation, showed that the reaction follows a pseudo-first-order kinetics, which is consistent with the proposed kinetic model. The resulting linear dependence of ln(C0/C) with time shows that the photodecomposition reaction of Orange II is a pseudo-first order reaction, the rate constant of which is (35.1 ± 1.3).10-3 min-1.
30 January 2025 in Microchemical Journal
15 June 2021 in Kazakhstan journal for oil & gas industry
ГТГабдуллин Маратбек Тулебергенович
Габдуллин Маратбек Тулебергенович
+6
This work investigates the effectiveness of fly ash particles as a solid demulsifier for destabilizing an oil-water emulsion and effectively removing water. The size of the fraction in the used solid powder does not exceed 40 microns in diameter. The demulsifier consists mainly of hematite (Fe2O3) and corundum (Al2O3) phases. The introduction of fly ash into the oil emulsion leads to demulsification of water from oil. The dosage of the powder ranged from 0.1 to 1 g. An increase in the dosage of fly ash leads to a rapid discharge of water from the emulsion. The study identifies the demulsifying properties of fly ash powder. Also, upon redispersion of demulsified samples, no re-emulsion was observed, as a result of which, it can be assumed that fly ash powder can contribute to deasphalting of oil-water emulsion. Reuse of industrial waste is an important method for improving the ecological state of the country.