An objective method has been developed for finding the centre of a cyclone using thermal infrared (TIR) image data from geostationary satellites. The data from the Meteosat-5 TIR channel have been analysed to demonstrate the utility of the method. The minimization approach has been used to determine the centre with the assumption of a near elliptic structure in the surrounding of the central dense overcast (CDO) region of a cyclone. The ellipse fitting technique is able to estimate objectively the centre for more than 70% cases with an error of less than 50 km.
7 November 2017 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
A fog detection algorithm using INSAT-3D imager data has been developed and tested. The algorithm emphasizes continuous fog detection as the current fog detection algorithm which is used for the operational fog product generation over India is having temporal discontinuity during dawn and dusk. Moreover, currently, the INSAT-3D fog product over India is being generated with different algorithms for day and night. In this paper, a single algorithm using brightness temperature difference of 3.9 and 10.8 μm wavelength for both day and night has been used. The thermal infrared, water vapor, and visible channel spectral information (for daytime) has been used as additional criteria to reduce false alarm. The thresholds used are determined dynamically using an image-based method. The spatial homogeneity test, which is a special characteristic of fog, has also been carried out to minimize false detection. Validation was carried out against visibility data over five airports in the Indo-Gangetic (IG) plains of India. It shows that probability of detection and false detection to be 66% and 10%, respectively, for 2013–2014 and 68% and 10% for 2015–2016. The algorithm is able to capture the entire life cycle of fog from formation to dissipation, consistently for both the season with different weather conditions.
14 August 2019 in IEEE Geoscience and Remote Sensing Letters
The leaf area index (LAI) is a crucial parameter that governs the physical and biophysical processes of plant canopies and acts as an input variable in land surface and soil moisture modeling. The ScatSat-1 is the latest microwave Ku-band scatterometer mission of Indian Space Research Organization (ISRO), provides data at a higher temporal and spatial resolution for various applications. Due to its all-weather operational capability, it could be used as an alternative to the optical/IR sensors for the LAI estimation. In the technical literature domain, no testing has been done to estimate the LAI using ScatSat-1 scatterometer data. Therefore, the objective of this study is to retrieve the LAI using the ScatSat-1 backscattering by modifications of two different models viz. water cloud model (WCM) and the recently developed Oveisgharan et al. model and compared against the PROBA-V, MODIS, and ground-based LAI products. To assess the performance of these models, coefficient of determination (R²), root-mean-squared error (RMSE) and bias are computed. For Oveisgharan et al., the values of R², RMSE and bias were obtained as 0.87, 0.57 m²m⁻², and 0.05 m²m⁻² respectively, whereas for WCM model, the values were found as 0.82, 0.67 m²m⁻², and 0.32 m²m⁻² respectively. This investigation showed that the modifications in Oveisgharan et al. model provide marginally better results in the retrieval of LAI using ScatSat-1 data than the WCM model. The models' limitation may be less serious for crop management studies because the majority of crops attains its maturity at LAI values less than 6 m²/m².
1 December 2011 in Journal of Earth System Science