Finite-element (FE) analysis makes it possible to investigate different parameters and their effect on the carrying capacity or failure behavior of a component in an easy and cost-effective way. But to do this, the numerical model needs to reproduce the material behavior as close to reality as possible. This paper presents a numerical model developed to simulate the complex failure behavior of dowel connections in wood loaded perpendicular to grain. This includes both the ductile behavior, such as the embedding or bearing failure under the dowel or supports, and the brittle failure, such as cracking of the wood near the dowels. Using contact elements, the crack growing under tension perpendicular to grain and/or shear stresses can be modeled explicitly. The linear elastic-plastic stress-strain behavior of the wood allows one to simulate the plastic deformations of the ductile behavior. The comparison of the numerical results with the load capacity of different experimental test series confirms that the nu...
Wood as a hygroscopic material interacts with the ambient climate variations of relative humidity and temperature. Due to constrained volumetric strains, i.e. swelling and shrinkage, changes in moisture content impose moisture induced stresses (MIS) which, if exceeding the tensile stress of the material, can cause fractures such as cracks or delamination. A monitoring campaign was initiated to measure the variations of the climate and moisture content in existing timber bridges and newly erected structure. Additionally, experimental test series under laboratory conditions were performed. Finally, the moisture induced mechanical response was simulated using a coupled moisture diffusion and mechanical model. The measuring results support the choice of the known service classes depending on the user service resp. building type. On the other hand, a possible differentiation of the service class over the cross section is discussed according to measuring results and practical applications. Cross sections are classified regarding the assumed ambient climate in service by numerical simulations developing the moisture content and gradient over the cross section.
18 October 2014 in Journal of Civil Structural Health Monitoring