1 December 2023 in Acta Mechanica et Automatica
The present experimental research work aims to elaborate a new composite material (CM) composed of plasters reinforced with mats of long unidirectional luffa sponge fibres, treated chemically by 1% NaOH solution during 90 min at a temperature of 50°C, in orderto improve its thermomechanical and physical properties. The influence of fibre mat and fibre napping numbers of luffa sponge on density, porosity, flexural strength, thermal conductivity, thermal diffusivity, thermal effusivity and specific heat capacity properties was investigatedto lower building energy consumption. As far as our case is concerned, we processed a composite using single, double and triple-layer luffa sponge fibre mats. In our study, we are basically confined our experiments to three-layer mats. The experimental results revealed that the networking structure of fibres increases the flexural strength and decreases the thermal conductivity for a two-layer fibre wire mesh imbedded in the plaster matrix as compared with the neat plaster. However, there is a decrease in strength for a triple-layer composite, which referred to poor wetting of the fiber with the matrix material.
1 January 2025 in Composites: Mechanics, Computations, Applications: An International Journal
This research work is undertaken within the framework of the theme of valorizing natural and local resources, specifically the stem of the Juncus effusus plant (Smar). The Juncus raw fibers have a short lifespan. Therefore, when they are chemically treated, a solution is created in order to limit their long-term degradation and to promote their mechanical properties. The main goal of this paper is to introduce the chemical treatment that was carried out by sodium hydroxide, with several concentrations (1%, 2%, 3%, 4%, and 5%) during different time intervals (1 h, 2 h, 3 h, 4 h, and 5 h). The Juncus effusus fibers were mechanically characterized (through microtraction tests and thermal ATG) before and after treatment. The results revealed that the thermomechanical properties were enhanced after alkalization.
31 July 2026 in Journal of Composite Materials
The development of sustainable building materials from renewable resources has attracted growing attention as an alternative to conventional fossil-based materials. The currant study investigates the effect of alkali-treated Juncus effusus fibers on the thermophysical and mechanical properties of plaster composites. Fibers were treated with a 3% NaOH solution for 4 h at ambient temperature before being incorporated into the plaster matrix at different mass fractions. The resulting composites were characterized in terms of density, thermal conductivity, sound propagation velocity, flexural strength, and compressive strength. Compared to conventional plaster, the optimized composite exhibited a 29% increase in flexural strength and a 25% increase in compressive strength, while its density decreased by 21%. In addition, thermal conductivity and sound propagation velocity were reduced by 45% and 40%, respectively, indicating an improved thermal and acoustic insulation. These improvements are attributed to the reinforcing effect of the treated Juncus effusus fibers within the plaster matrix. The results demonstrated that Juncus effusus-reinforced plaster is a lightweight material with improved mechanical properties and high thermal efficiency, making it a promising candidate for sustainable building applications, particularly for thermal insulation.