The Energy & Environmental Research Center (EERC) led a study to validate novel and emerging technologies as commercial monitoring techniques for application in carbon dioxide (CO2) injection operations. This applied research was conducted at Basin Electric Power Cooperative’s (Basin Electric’s) active CO2-injection operations in Beulah, North Dakota, in two phases. The EERC previously completed a set of baseline (preinjection) activities in Phase 1, which included 1) design of an automated, integrated, modular (AIM) monitoring station; 2) time-lapse electromagnetic (EM) field surveys; 3) drone-based surveillance studies; 4) time-lapse monitoring with seismic methods; and 5) advanced wellbore-monitoring methods. This report focuses on key accomplishments and major findings for the Phase 2 follow-on operational monitoring activities, including 6) deployment of an AIM monitoring network, 7) EM monitoring of CO2 with real-time data processing, 8) continued seasonal drone-based surveillance studies, 9) passive and active seismic surveys, and 10) wellbore monitoring with nuclear magnetic resonance (NMR) for near-surface characterization. All CO2-injection operations, including enhanced oil recovery, acid gas, or dedicated storage, must be permitted under the Underground Injection Control (UIC) program and are subject to monitoring requirements to ensure containment and that underground sources of drinking water are protected. Current state-of-the-art monitoring techniques often require many labor-intensive hours dedicated to the acquisition of data and typically rely on commercial facilities to process raw data from the field. The next generation of monitoring techniques should be cost-effective, have a lower impact, generate more continuous and autonomous data streams, and perform faster in terms of time to acquire and/or process the data. Monitoring data collected during Phase 2 have demonstrated the commercial readiness of multiple novel monitoring techniques that comply with the most rigorous UIC requirements for application across all kinds of CO2-injection projects, and learnings facilitated by this research have directly benefited other CO2-injection projects. Major accomplishments in Phase 2 include the following: • Three AIM stations were deployed, demonstrating a low-impact method for acquiring monitoring data efficiently. In addition, an automated soil gas-sampling system and real-time dashboard for processing and visualizing soil gas results and attributing source through a decision-based framework were successfully tested at significant cost savings relative to traditional manual soil gas-sampling methods. • A 3D tTEM survey and a traditional 2D ERT survey to characterize near-surface conditions were collected for comparison. tTEM resulted in much lower impact and faster acquisition and yielded high-quality results in three dimensions at significant cost savings. The interpretation of resistivity structure in the shallow subsurface was supported with well-based NMR and lithology logs. • A time-lapse CSEM survey was acquired using metal-cased groundwater wells to transmit current deep into the earth and image CO2 injection into the reservoir. A spCSEM response was observed and evaluated in time-lapse, which uniquely captured the interplay of the reservoir’s connectivity and response to pressure and flow. This was the first time this method used multiple stages of toggling CO2 injection between two wells to understand well interaction. • Three drone missions were repeated with photogrammetry, lidar, thermal, and multispectral to support geophysical survey work and characterize seasonal changes of vegetation to monitor surface conditions. In addition, a novel workflow using multispectral imagery was developed for optimizing survey acquisitions to ensure repeatability between surveys by accounting for seasonal effects. • A passive seismic survey was repeated and imaged the reservoir and Precambrian basement. • Two repeat active seismic surveys with low-energy, low-impact sourcing with AWD were acquired and showed a time-lapse response for imaging the injected CO2 in the reservoir at significant cost savings relative to traditional seismic acquisition methods. Additionally, compressive sensing decimation and reconstruction was successfully implemented to image the CO2 injection. The EERC has successfully completed all activities and achieved all milestones within the performance period of Subtask 1.6. Of the techniques tested, the AIM concept, spCSEM, tTEM, and AWD are noted for their novelty, acquisition efficiency, cost-effectiveness, low impact, and compliance with UIC requirements. This subtask was funded through the EERC–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. The EERC also recognizes its project partners—Basin Electric Power Cooperative, Dakota Gasification Company, Carbon Vault Holdings LLC, and Coteau Properties Company—for their significant contributions to the project, including but not limited to providing access to the site, sharing commercial data for comparison to research results, and supporting fieldwork with their staff.