6 December 2016 in Measurement Science and Technology
The method of precise GNSS positioning using corrections from a network of reference stations, the so-called Network RTK, is currently the most accurate real time kinematic positioning method. The reliability of this method is largely dependent on the accuracy of determination of network ionospheric and geometric corrections (taking into account the tropospheric refraction and orbit errors). There are many indexes describing the reliability of Network RTK positioning in the aspect of the accuracy of modelling these errors. The so-called solution quality indicators are used for this purpose. They are parameters determined in the central network pre-processing which provide quantitative information regarding the predicted reliability of the positioning in an area encompassed by a network of reference stations. Unfortunately, their interpretation is hindered due to the lack of connection with basic parameters describing precise positioning quality, i.e. the correctness of the carrier phase ambiguity resolution and the accuracy of the rover position. This study presents a new approach to the design of quality indicators for the Network RTK method, based on a quantitative description of two parameters—solution accuracy and availability. The presented method is based on the existing parameters describing the probability of the correct fixing of ambiguities and the estimation of the fixed baseline solution accuracy. However, a stochastic model of observation, taking into account the accuracy of network corrections is used for these calculations. The proposed method enables a full account of all parameters affecting the reliability of positioning, which is not possible with the currently applied methods. Numerical tests of the new indicators carried out for a part of the regional reference stations network confirmed the effectiveness of this approach. The proposed indicators provide much more clear identification of the time periods for which the reliability of the solution was lower compared to the existing quality indexes which indications were unclear and inaccurate.
1 January 2017 in Metrologia
In the framework of the regional EURAMET.M.G-K2 comparison of absolute gravimeters, 17 gravimeters were compared in November 2015. Four gravimeters were from different NMIs and DIs, they were used to link the regional comparison to the CCM.G.K2 by means of linking converter. Combined least-squares adjustments with weighted constraint was used to determine KCRV. Several pilot solutions are presented and compared with the official solution to demonstrate influences of different approaches (e.g. definition of weights and the constraint) on results of the adjustment. In case of the official solution, all the gravimeters are in equivalence with declared uncertainties. Main text To reach the main text of this paper, click on Final Report . Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/ . The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
1 November 2016 in Journal of Surveying Engineering
The concept of global navigation satellite system (GNSS) real-time kinematic (RTK) positioning through the use of multiple reference stations (Network RTK) is the most common approach to relative positioning, which makes it possible to achieve centimeter-level accuracy for medium baselines. In this approach, ionospheric and geometric correction terms, generated on the basis of a model of interpolation of the distance-dependent biases, are applied to the functional model of rover positioning. The accuracy and reliability of Network RTK performance depend on the accuracy of the defined correction terms. Especially during storm-level ionospheric activity, the applied spatial interpolation model might not be suitable for the real ionospheric state, causing the ambiguity resolution to be less reliable, or even impossible, because of high residual errors. Thus, the residual errors can substantially degrade the correctness of the functional model and should be accounted for to obtain optimal estimation o...
22 November 2022 in Journal of Applied Geodesy
At the Pieniny Klippen Belt in Poland, the novel primary reference baseline EURO5000 is required as part of the European Research project GeoMetre to both validate refractivity-compensated EDM prototypes and investigate the metrological traceability of GNSS-based distances. Since the aimed uncertainty is 1 mm at 5 km (k = 2), the design, construction, and validation must be carefully prepared to fulfil the high standards of the GeoMetre field campaigns which are planned to be carried out in May 2022. This contribution describes the main features of the EURO5000 and presents the results of the preliminary validation which includes a first comparison between the results obtained by using precise currently available EDMs as well as GNSS techniques following the standard GNSS geodetic processing algorithms, on the one hand, and the improved GNSS-Based Distance Meter (GBDM+) approach developed at UPV, on the other hand. The preliminary validation presented in this contribution also permits (1) to detect potential problems in the use of the baseline such as potential geodynamic problems, atmospheric refraction or multipath limitations, (2) to produce a set of reliable results, and (3) to pave the way for the final field comparisons between the novel EDMs and the GBDM+ approach. The result of this metrological experiment may significantly contribute to overcome the limitations of current high-precision deformation monitoring applications that require their scale to be consistent with the SI-metre within 0.1 ppm in several km.
31 May 2016 in Reports on Geodesy and Geoinformatics
The article presents current issues and research work conducted in the Department of Geodesy and Geodetic Astronomy at the Faculty of Geodesy and Cartography at Warsaw University of Technology. It contains the most important directions of research in the fields of physical geodesy, satellite measurement techniques, GNSS meteorology, geodynamic studies, electronic measurement techniques and terrain information systems.
1 January 2012 in Artificial Satellites