Xinghu Yu

Xinghu Yu

Auto-generated profile, based on publicly available information

Xinghu Yu

Research Center of Intelligent Control and Systems, Yongjiang Laboratory, Ningbo, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 January 2021 in IEEE Transactions on Cybernetics
Verified
Journal Article
Closed access
Huijun GaoHuijun Gao
Huijun Gao
ZLZhengkai Li
Zhengkai Li
XYXinghu Yu
Xinghu Yu
JQJianbin Qiu
Jianbin Qiu
This article proposes a hierarchical multiobjective heuristic (HMOH) to optimize printed-circuit board assembly (PCBA) in a single beam-head surface mounter. The beam-head surface mounter is the core facility in a high-mix and low-volume PCBA line. However, as a large-scale, complex, and multiobjective combinatorial optimization problem, the PCBA optimization of the beam-head surface mounter is still a challenge. This article provides a framework for optimizing all the interrelated objectives, which has not been achieved in the existing studies. A novel decomposition strategy is applied. This helps to closely model the real-world problem as the head task assignment problem (HTAP) and the pickup-and-place sequencing problem (PAPSP). These two models consider all the factors affecting the assembly time, including the number of pickup-and-place (PAP) cycles, nozzle changes, simultaneous pickups, and the PAP distances. Specifically, HTAP consists of the nozzle assignment and component allocation, while PAPSP comprises place allocation, feeder set assignment, and place sequencing problems. Adhering strictly to the lexicographic method, the HMOH solves these subproblems in a descending order of importance of their involved objectives. Exploiting the expert knowledge, each subproblem is solved by an elaborately designed heuristic. Finally, the proposed HMOH realizes the complete and optimal PCBA decision making in real time. Using industrial PCB datasets, the superiority of HMOH is elucidated through comparison with the built-in optimizer of the widely used Samsung SM482.

29 December 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ZLZhitai Liu
Zhitai Liu
Weiyang LinWeiyang Lin
Weiyang Lin
XYXinghu Yu
Xinghu Yu
JRJUAN J. RODRÍGUEZ-ANDINA
JUAN J. RODRÍGUEZ-ANDINA
Huijun GaoHuijun Gao
Huijun Gao
This article addresses the synchronization control problem for dual-linear-motors-driven systems with model uncertainties and disturbances. An approximation-free robust synchronization control scheme based on cross-coupled control (CCC) frame is proposed to achieve high-precision tracking and synchronization performance, along with excellent uncertainties and disturbances rejection ability. More specifically, the CCC frame is designed to handle the asynchronous motion of two parallel motors. The main advantage is that the proposed method does not require the explicit system model, and any approximations utilized to handle the model uncertainties, such as estimation, identification, and online learning, are not required. Therefore, the computational burden and complexity of the controller are significantly reduced. Considering the importance of the transient and steady-state response, the concept and technology of prescribed performance are adopted to guarantee the control effect and state constraints. In addition, none of the high-order derivatives of desired trajectory, difficult to obtain directly in many applications, are used in the proposed controller. Furthermore, the stability and convergence performance of the closed-loop system are rigorously demonstrated. Finally, comparative experiments show the effectiveness of this study via a dual-driven H-type gantry.

27 March 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ZLZhitai Liu
Zhitai Liu
Huijun GaoHuijun Gao
Huijun Gao
XYXinghu Yu
Xinghu Yu
Weiyang LinWeiyang Lin
Weiyang Lin
JQJianbin Qiu
Jianbin Qiu
DQDongsheng Qu
Dongsheng Qu
This article proposes a gradient descent (GD) algorithm-based B-spline wavelet neural network (GDBSWNN) learning adaptive controller for linear motor (LM) systems under system uncertainties and actuator saturation constraints. A recursive-least-squares-algorithm-based indirect adaptive strategy is used to effectively estimate model parameters, which can guarantee that they converge to true values. A novel GDBSWNN compensator is proposed to estimate the remaining complex uncertainties, where weights are updated by online GD training. An auxiliary system is integrated into the control scheme to address the saturation problem, which guarantees stability and satisfactory control performance when saturation occurs. In addition, a stability analysis is presented to prove that all the signals of the closed-loop system are bounded using the Lyapunov theory. Experiments have been conducted on an LM-driven motion platform, where different controllers have been tested, demonstrating the effectiveness and advantages of the proposed approach.

17 March 2021 in IEEE Transactions on Cybernetics
Verified
Journal Article
Closed access
HPHuihui Pan
Huihui Pan
DZDun Zhang
Dun Zhang
Weichao SunWeichao Sun
Weichao Sun
XYXinghu Yu
Xinghu Yu
In this article, an adaptive event-triggered fault-tolerant asymptotic tracking control problem guaranteeing prescribed performance is addressed for a class of block-triangular multi-input and multioutput uncertain nonlinear systems with unknown nonlinearities, unknown control directions, and actuator faults. Through a systematic co-design of the adaptive control law and the event-triggered mechanism, including fixed and relative threshold strategies, a control scheme with low structure and calculation complexity is designed to conserve system communication and computation resources. In this design, the output asymptotic tracking is achieved. The Nussbaum gain technique is incorporated to overcome unknown control directions with a new adaptive law, and a type of barrier Lyapunov function is adopted to handle the prescribed performance control problem, which contributes to a novel control law with strong robustness. The robust controller can address the uncertainties and couplings derived from the system structure, actuator faults, and event-triggered rules, without using approximating structures or compensators. Besides, the explosion of complexity is avoided. It is proved that all signals of the closed-loop system remain bounded, and system tracking errors asymptotically approach 0 with the prescribed performance, while the Zeno behavior is prevented. Finally, the effectiveness of the proposed control scheme is evaluated via an application example of the half-car active suspension system.

27 April 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
XZXiaolong Zheng
Xiaolong Zheng
XYXinghu Yu
Xinghu Yu
JJJiaxu Jiang
Jiaxu Jiang
XYXuebo Yang
Xuebo Yang
In this article, a practical finite-time command filtered backstepping control method is proposed for a class of uncertain nonlinear systems with unknown control direction coefficients, unmodeled dynamics, and external disturbances. In this approach, practical finite-time command filters are proposed to get the differential estimations of the system signals, and such estimations are used to construct the approximations of the system uncertainties. In order to address the design difficulties caused by the system unknown control direction coefficients, a virtual control direction method is presented by using a system equivalence transformation. Based on practical finite-time Lyapunov stability criterion, it can be proved that the system tracking error is practical finite-time stable with convergence rate faster than exponential. Finally, this method is applied to a direct current motor control system, and experimental results demonstrate the effectiveness of the proposed control scheme.

4 June 2024 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
Zhan LiZhan Li
Zhan Li
YYYipeng Yang
Yipeng Yang
XYXinghu Yu
Xinghu Yu
CLCuiyu Liu
Cuiyu Liu
OKOkyay Kaynak
Okyay Kaynak
Huijun GaoHuijun Gao
Huijun Gao
Unmanned aerial manipulators (UAMs) extend the operational reach of unmanned aerial vehicles (UAVs), yet are often limited by the underactuation of traditional UAV platforms, restricting the workspace of their end-effectors. This article introduces an overactuated UAM system comprising a biaxial-tilting thrust-vectoring quadrotor coupled with a serial manipulator. This configuration offers superior controllable performance, an expanded manipulator workspace, and robust disturbance rejection compared to conventional underactuated UAMs. To mitigate practical uncertainties and disturbances–including model imprecision, environmental factors, changing loads, and the coupling wrenches between the UAV and manipulator–a fixed-time (FxT) controller and a FxT disturbance observer are developed, leveraging a high-order fully actuated (HOFA) control strategy. The implicit Lyapunov function (ILF) approach is employed for stability analysis, offering a streamlined proof of convergence. Simulations and flight tests affirm the system's trajectory tracking precision, with positional and attitudinal accuracies within $1\;\text{cm}$ and $1^{\circ }$ , respectively.